Roll over image to zoom
SKU: 93637527
Grundfos Hydro MPC-E 2 x CRIE 5-5 Single Phase 2 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Across installations such as cafe strips and small assemblies where a dishwasher cycle drops the street pressure, the Hydro MPC-E 2 CRIE 5-5 maintains stable pressure at every draw-off point. Part number 93637527 provides the complete tested package in a single order line.
Flow capacity reaches 336 L/min. Up to 49 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 50 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 1 x 400 V power at 50 Hz with a rated current of 6.4 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Expect it on water supply networks and irrigation schemes sites, plus commercial buildings duties. It provides clean-water pressure boosting for both new plant rooms and refits.
Features
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Each pump is driven by permanent magnet motors with frequency-controlled speed matching demand.
- Two Grundfos CRIE 5-5 pumps share the boosting work in parallel.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Rated 1.5 kW (P2) on every main pump in the frame.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
What's Included
- 2 x Grundfos CRIE 5-5 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 336 L/Min |
| Max Head | 49 m |
| Power | 2 x 1.5 kW / 415v |
| Rated Current | 6.4 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What maximum water flow can this packaged multi pump assembly supply during peak consumption hours?
Operating across its factory curve, the Grundfos Hydro MPC-E 2 CRIE 5-5 V1 GA-A-A-AG discharges up to 336 L/min of clean water to maintain consistent line pressure during peak demand cycles.
How is mechanical drive power and electronic speed control configured on this booster unit?
Each centrifugal stage of the Hydro MPC-E 2 CRIE 5-5 is driven by a 1.5 kW variable frequency drive MGE electric motor running on 1 x 400 V power, utilizing built-in variable speed drives to adjust output dynamically.
What vertical elevation head and maximum operating pressure does this booster package develop?
Elevating water across multi-level pipework, the Hydro-MPC-E-2-CRIE-5-5 maintains up to 49 m total dynamic head with an overall 16 bar maximum operating limit.
Which inlet and outlet manifold dimensions and valve fittings are integrated onto this booster unit?
Plumbed for rapid site installation, the Hydro MPC E 2 CRIE 5 5 includes R 2" stainless steel headers equipped with dedicated isolating valves, check valves, and pressure transmitters.
Under what warranty coverage is this complete multi pump booster package supplied?
Grundfos provides two-year manufacturer warranty coverage on the 2 CRIE 5-5 (Hydro MPC-E), securing the complete multi-pump package, manifolds, and integrated electronics.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us