Roll over image to zoom
SKU: 93637532
Grundfos Hydro MPC-E 2 x CRIE 5-9 Single Phase 2 x 2.2kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Small sites where a duty-point review calls for reserve pump capacity rely on booster systems with no tolerance for pressure variation, and the Hydro MPC-E 2 CRIE 5-9 is engineered for exactly that duty. Part number 93637532 provides the complete tested package in a single order line.
It handles flows up to 336 L/min across the system. The pumps can develop up to 89 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
Factory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 1 x 400 V supply at 50 Hz with a rated current of 8.9 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Expect it on industry and irrigation schemes sites, plus high-rise developments duties. It provides clean-water pressure boosting for both new plant rooms and refits.
Features
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- A suction-side pressure sensor guards the pumps against dry running.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Rated 2.2 kW (P2) on every main pump in the frame.
- The system pairs two CRIE 5-9 pumps in parallel duty, controlled as a single coordinated system.
What's Included
- 2 x Grundfos CRIE 5-9 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 336 L/Min |
| Max Head | 89 m |
| Power | 2 x 2.2 kW / 415v |
| Rated Current | 8.9 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What electrical motor power and drive electronics operate the pumps on this booster assembly?
Electronic speed regulation across the Grundfos Hydro MPC-E 2 CRIE 5-9 V1 GA-A-A-AG is provided by two variable frequency drive MGE electric motors rated at 2.2 kW apiece on 1 x 400 V power, modulating motor rpm according to demand.
What maximum system operating pressure and dynamic head does this packaged booster set deliver?
Hydraulic elevation capability on the Hydro MPC-E 2 CRIE 5-9 generates up to 89 m total dynamic head while supporting a maximum operating pressure rating of 16 bar.
Which suction and discharge manifold connections and isolation valves are integrated onto the skid?
Common manifolding across the Hydro-MPC-E-2-CRIE-5-9 utilizes R 2" stainless steel suction and discharge pipework with integrated non-return valves and isolating ball valves.
How is this variable speed multi pump package supported under manufacturer warranty?
Investment protection for the Hydro MPC E 2 CRIE 5 9 features a genuine Grundfos two-year manufacturer warranty supported by nationwide technical service and replacement components.
What peak water displacement rate does this variable frequency booster unit achieve?
For high-demand distribution pipework, the 2 CRIE 5-9 (Hydro MPC-E) delivers a peak water displacement rate of 336 L/min across its parallel multistage pump assembly.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us