Roll over image to zoom
SKU: 93637825
Grundfos Hydro MPC-E 2 x CRNE 10-2 Three Phase 2 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
The Hydro MPC-E 2 CRNE 10-2 is a proven fit for gymnasiums, aquatic centres and student housing running wall-to-wall showers, with two Grundfos CRNE 10-2 pumps staged automatically as demand varies. The complete system ships factory assembled and tested under part number 93637825.
The system supports flow rates up to 521 L/min. It can develop up to 28 metres of head for dependable pressure boosting. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 6.4 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers irrigation schemes, high-rise developments and commercial buildings. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Each main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Two Grundfos CRNE 10-2 pumps share the boosting work in parallel.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
What's Included
- 2 x Grundfos CRNE 10-2 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 521 L/Min |
| Max Head | 28 m |
| Power | 2 x 1.5 kW / 415v |
| Rated Current | 6.4 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which water throughput capacity does this multi pump booster set maintain during maximum facility draw?
Operating across its factory curve, the Grundfos Hydro MPC-E 2 CRNE 10-2 V1 GA-A-A-AG discharges up to 521 L/min of clean water to maintain consistent line pressure during peak demand cycles.
How is electric motor propulsion and inverter regulation delivered across this booster assembly?
Each centrifugal stage of the Hydro MPC-E 2 CRNE 10-2 is driven by a 1.5 kW variable frequency drive MGE electric motor running on 3 x 400 V power, utilizing built-in variable speed drives to adjust output dynamically.
Under full duty operation, what maximum head and operating pressure does this booster package produce?
Elevating water across multi-level pipework, the Hydro-MPC-E-2-CRNE-10-2 maintains up to 28 m total dynamic head with an overall 16 bar maximum operating limit.
Which manifold connection ports and isolation valve components are supplied on this booster set?
Plumbed for rapid site installation, the Hydro MPC E 2 CRNE 10 2 includes R 2 1/2" stainless steel headers equipped with dedicated isolating valves, check valves, and pressure transmitters.
What warranty coverage protects this factory assembled multi pump booster package?
Grundfos provides two-year manufacturer warranty coverage on the 2 CRNE 10-2 (Hydro MPC-E), securing the complete multi-pump package, manifolds, and integrated electronics.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us