Roll over image to zoom
SKU: 93637830
Grundfos Hydro MPC-E 2 x CRNE 10-3 Three Phase 2 x 2.2kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
The Hydro MPC-E 2 CRNE 10-3 is a proven fit for mixed-use buildings where a single booster covers retail, offices and apartments, with two Grundfos CRNE 10-3 pumps staged automatically as demand varies. Quote part number 93637830 to have it arrive pre-configured and ready for the plant room.
It handles flows up to 521 L/min across the system. The pumps can develop up to 43 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 8.9 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers irrigation schemes, commercial buildings and water supply networks. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Two Grundfos CRNE 10-3 vertical multistage pumps run in parallel on one common base frame.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- Each main pump is rated 2.2 kW (P2), so per-pump draw scales down as speed follows demand.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- Each pump is driven by permanent magnet motors with frequency-controlled speed matching demand.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- A suction-side pressure sensor guards the pumps against dry running.
What's Included
- 2 x Grundfos CRNE 10-3 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 521 L/Min |
| Max Head | 43 m |
| Power | 2 x 2.2 kW / 415v |
| Rated Current | 8.9 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What motor technology and frequency drive system provides propulsion for this booster package?
Electronic speed regulation across the Grundfos Hydro MPC-E 2 CRNE 10-3 V1 GA-A-A-AG is provided by two variable frequency drive MGE electric motors rated at 2.2 kW apiece on 3 x 400 V power, modulating motor rpm according to demand.
How much total head pressure does this parallel multistage booster set deliver to the header?
Hydraulic elevation capability on the Hydro MPC-E 2 CRNE 10-3 generates up to 43 m total dynamic head while supporting a maximum operating pressure rating of 16 bar.
How are the parallel pump wet ends interconnected with suction and discharge manifolding?
Common manifolding across the Hydro-MPC-E-2-CRNE-10-3 utilizes R 2 1/2" stainless steel suction and discharge pipework with integrated non-return valves and isolating ball valves.
What factory warranty backing and service protection covers this booster set?
Investment protection for the Hydro MPC E 2 CRNE 10 3 features a genuine Grundfos two-year manufacturer warranty supported by nationwide technical service and replacement components.
Under high water usage periods, what displacement flow rate does this packaged booster set generate?
For high-demand distribution pipework, the 2 CRNE 10-3 (Hydro MPC-E) delivers a peak water displacement rate of 521 L/min across its parallel multistage pump assembly.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us