Roll over image to zoom
SKU: 93637835
Grundfos Hydro MPC-E 2 x CRNE 10-5 Three Phase 2 x 3kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
The Hydro MPC-E 2 CRNE 10-5 is a proven fit for expanding commercial sites whose original mains feed no longer keep pace, with two Grundfos CRNE 10-5 pumps staged automatically as demand varies. Part number 93637835 provides the complete tested package in a single order line.
Flow capacity reaches 518 L/min. Up to 72 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 50 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 3 x 400 V power at 50 Hz with a rated current of 12.1 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include commercial buildings, irrigation schemes and industry. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Two Grundfos CRNE 10-5 vertical multistage pumps run in parallel on one common base frame.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Each main pump is rated 3 kW (P2), so per-pump draw scales down as speed follows demand.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
What's Included
- 2 x Grundfos CRNE 10-5 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 518 L/Min |
| Max Head | 72 m |
| Power | 2 x 3 kW / 415v |
| Rated Current | 12.1 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which vertical head pressure does this parallel multistage booster assembly generate?
Under peak line requirements, the Grundfos Hydro MPC-E 2 CRNE 10-5 V1 GA-A-A-AG delivers a maximum vertical head of 72 m and accommodates working system pressures up to 16 bar.
What manifold connection hardware and isolation valves are installed across this booster skid?
Factory pipework configuration on the Hydro MPC-E 2 CRNE 10-5 incorporates R 2 1/2" stainless steel manifolds, complete with individual pump isolating valves and line non-return valves.
Which factory warranty coverage protects the complete multi pump booster skid?
Factory backing for the Hydro-MPC-E-2-CRNE-10-5 includes an authentic Grundfos two-year manufacturer warranty covering the pumps, drive electronics, and skid assembly.
How much water flow can this multi stage pump package discharge when all pumps are operational?
At full operational capacity, the Hydro MPC E 2 CRNE 10 5 provides up to 518 L/min total water throughput to satisfy heavy facility consumption requirements.
How is motor power and variable frequency regulation configured across this booster assembly?
Power for the 2 CRNE 10-5 (Hydro MPC-E) is delivered via two high-efficiency variable frequency drive MGE electric motors of 3 kW each, wired for a 3 x 400 V electrical supply with built-in speed regulation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us