Roll over image to zoom
SKU: 93637810
Grundfos Hydro MPC-E 2 x CRNE 5-12 Three Phase 2 x 3kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Where holiday units and boutique apartment blocks juggling showers at the morning peak are served from a single booster, the Hydro MPC-E 2 CRNE 5-12 holds pressure steady as two CRNE 5-12 pumps respond to changing flow. Quote part number 93637810 to have it arrive pre-configured and ready for the plant room.
Flow capacity reaches 335 L/min. Up to 118 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
Factory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 3 x 400 V supply at 50 Hz with a rated current of 12.1 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Applications include irrigation schemes, water supply networks and commercial buildings. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Rated for 16 bar system pressure; motors carry IP54 protection.
- The system pairs two CRNE 5-12 pumps in parallel duty, controlled as a single coordinated system.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Each main pump is rated 3 kW (P2), so per-pump draw scales down as speed follows demand.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
What's Included
- 2 x Grundfos CRNE 5-12 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 335 L/Min |
| Max Head | 118 m |
| Power | 2 x 3 kW / 415v |
| Rated Current | 12.1 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under full discharge duty, what maximum elevation head does this packaged booster skid maintain?
Under peak line requirements, the Grundfos Hydro MPC-E 2 CRNE 5-12 V1 GA-A-A-AG delivers a maximum vertical head of 118 m and accommodates working system pressures up to 16 bar.
Which suction and discharge pipe fittings are factory integrated on this packaged booster set?
Factory pipework configuration on the Hydro MPC-E 2 CRNE 5-12 incorporates R 2" stainless steel manifolds, complete with individual pump isolating valves and line non-return valves.
What warranty coverage and Australian support backs this packaged booster system?
Factory backing for the Hydro-MPC-E-2-CRNE-5-12 includes an authentic Grundfos two-year manufacturer warranty covering the pumps, drive electronics, and skid assembly.
Which fluid delivery volume does this parallel booster assembly displace during high demand hours?
At full operational capacity, the Hydro MPC E 2 CRNE 5 12 provides up to 335 L/min total water throughput to satisfy heavy facility consumption requirements.
What motor propulsion and electronic speed control system drives this multi pump booster skid?
Power for the 2 CRNE 5-12 (Hydro MPC-E) is delivered via two high-efficiency variable frequency drive MGE electric motors of 3 kW each, wired for a 3 x 400 V electrical supply with built-in speed regulation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us