Roll over image to zoom
SKU: 93637795
Grundfos Hydro MPC-E 2 x CRNE 5-9 Three Phase 2 x 2.2kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Sites such as cafe strips and small assemblies where a dishwasher cycle drops the street pressure require consistent pressure regardless of demand fluctuation; the Hydro MPC-E 2 CRNE 5-9 achieves this with two CRNE 5-9 pumps operating in parallel. Everything is ordered under the single part number 93637795.
It handles flows up to 336 L/min across the system. The pumps can develop up to 89 metres of head when pressure demand increases. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 8.9 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Expect it on irrigation schemes and industry sites, plus high-rise developments duties. It provides clean-water pressure boosting for both new plant rooms and refits.
Features
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Two Grundfos CRNE 5-9 pumps share the boosting work in parallel.
- Rated 2.2 kW (P2) on every main pump in the frame.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- Rated for 16 bar system pressure; motors carry IP54 protection.
What's Included
- 2 x Grundfos CRNE 5-9 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 336 L/Min |
| Max Head | 89 m |
| Power | 2 x 2.2 kW / 415v |
| Rated Current | 8.9 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electric drive motor specification powers the parallel pump wet ends on this skid?
Electronic speed regulation across the Grundfos Hydro MPC-E 2 CRNE 5-9 V1 GA-A-A-AG is provided by two variable frequency drive MGE electric motors rated at 2.2 kW apiece on 3 x 400 V power, modulating motor rpm according to demand.
What vertical elevation capability and operating pressure rating does this booster package provide?
Hydraulic elevation capability on the Hydro MPC-E 2 CRNE 5-9 generates up to 89 m total dynamic head while supporting a maximum operating pressure rating of 16 bar.
What suction and discharge connection sizing is provided on the stainless steel manifolds?
Common manifolding across the Hydro-MPC-E-2-CRNE-5-9 utilizes R 2" stainless steel suction and discharge pipework with integrated non-return valves and isolating ball valves.
Which manufacturer warranty terms support this variable speed booster package?
Investment protection for the Hydro MPC E 2 CRNE 5 9 features a genuine Grundfos two-year manufacturer warranty supported by nationwide technical service and replacement components.
What peak water delivery capacity does this multi pump booster assembly maintain across peak demand?
For high-demand distribution pipework, the 2 CRNE 5-9 (Hydro MPC-E) delivers a peak water displacement rate of 336 L/min across its parallel multistage pump assembly.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us