Roll over image to zoom
SKU: 93637549
Grundfos Hydro MPC-E 3 x CRIE 10-1 Single Phase 3 x 0.75kW Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
In business parks adding tenancies faster than their mains can serve, the simultaneous demand of the morning peak places heavy loads on the supply; the Hydro MPC-E 3 CRIE 10-1 answers with three CRIE 10-1 pumps operating in parallel. Part number 93637549 provides the complete tested package in a single order line.
Flow capacity reaches 769 L/min. Up to 14 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The three-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 80 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 1 x 230 V at 50 Hz with a rated current of 6.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include industry, irrigation schemes and commercial buildings. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- Stainless steel manifolds provide two 80 mm manifold connections ready for pipework.
- Rated 0.75 kW (P2) on every main pump in the frame.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- A suction-side pressure sensor guards the pumps against dry running.
- Three Grundfos CRIE 10-1 vertical multistage pumps run in parallel on one common base frame.
What's Included
- 3 x Grundfos CRIE 10-1 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 769 L/Min |
| Max Head | 14 m |
| Power | 3 x 0.75 kW / 240v |
| Rated Current | 6.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How are the common suction and discharge headers arranged across the parallel pump set?
Header plumbing on the Grundfos Hydro MPC-E 3 CRIE 10-1 VN GA-A-A-AG provides DN80 stainless steel suction and discharge connections accompanied by isolating valves and discharge check valves.
What warranty coverage backs this complete factory assembled booster assembly?
Protection on the Hydro MPC-E 3 CRIE 10-1 is provided by a comprehensive Grundfos two-year manufacturer warranty with extensive Australian technical service and spare parts support.
Which total water transfer rate does this variable speed booster system displace under full duty?
Under maximum network draw, the Hydro-MPC-E-3-CRIE-10-1 supplies a peak fluid flow rate of up to 769 L/min across its variable speed centrifugal stages.
Which variable speed motor technology provides mechanical power to the pumps on this skid?
Propulsion across the Hydro MPC E 3 CRIE 10 1 is supplied by three variable frequency drive MGE electric motors rated at 0.75 kW each, operating on a 1 x 230 V electrical supply with integrated frequency converters for precise pressure control.
Under peak elevation requirements, what total dynamic head does this booster set achieve?
For vertical pressure boosting, the 3 CRIE 10-1 (Hydro MPC-E) produces up to 14 m total elevation head with a 16 bar maximum working pressure envelope.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us