Roll over image to zoom
SKU: 93637554
Grundfos Hydro MPC-E 3 x CRIE 10-2 Three Phase 3 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Gymnasiums, aquatic centres and student housing running wall-to-wall showers get a constant-pressure answer in this Grundfos Hydro MPC-E 3 CRIE 10-2 set. One factory-tested package replaces a shelf of loose components; order part number 93637554 to put it on site.
The system supports flow rates up to 781 L/min. It can develop up to 28 metres of head for dependable pressure boosting. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
Factory assembled on a common base, the set combines stainless steel pipework, two 80 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 3 x 400 V supply at 50 Hz with a rated current of 9.3 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Applications include irrigation schemes, high-rise developments and water supply networks. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- A suction-side pressure sensor guards the pumps against dry running.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Stainless steel manifolds provide two 80 mm manifold connections ready for pipework.
- The system pairs three CRIE 10-2 pumps in parallel duty, controlled as a single coordinated system.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Each main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
What's Included
- 3 x Grundfos CRIE 10-2 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 781 L/Min |
| Max Head | 28 m |
| Power | 3 x 1.5 kW / 415v |
| Rated Current | 9.3 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What manufacturer warranty protection backs the complete packaged booster skid?
The complete factory package of the Grundfos Hydro MPC-E 3 CRIE 10-2 V1 GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
Under maximum draw periods, what fluid delivery volume does this parallel booster package maintain?
Meeting high volumetric requirements, the Hydro MPC-E 3 CRIE 10-2 achieves a maximum water delivery capacity of 781 L/min through coordinated parallel pump operation.
How are the pump wet ends powered and speed controlled during variable demand cycles?
Mechanical drive on the Hydro-MPC-E-3-CRIE-10-2 features three inverter-controlled variable frequency drive MGE electric motors producing 1.5 kW per pump, powered by a 3 x 400 V connection for energy-optimised water delivery.
How much elevation lift and maximum discharge pressure can this multi stage booster unit maintain?
Discharge pressure performance allows the Hydro MPC E 3 CRIE 10 2 to achieve up to 28 m maximum dynamic head under a 16 bar rated system pressure.
Which suction and discharge pipe connections and isolating valves are fitted to this package?
Interconnecting pipework on the 3 CRIE 10-2 (Hydro MPC-E) features factory-fitted DN80 stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us