Roll over image to zoom
SKU: 93637564
Grundfos Hydro MPC-E 3 x CRIE 10-5 Three Phase 3 x 3kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Sites such as school blocks and council facilities fed by long, pressure-hungry reticulation require consistent pressure regardless of demand fluctuation; the Hydro MPC-E 3 CRIE 10-5 achieves this with three CRIE 10-5 pumps operating in parallel. One factory-tested package replaces a shelf of loose components; order part number 93637564 to put it on site.
This set provides up to 778 L/min of flow capacity. Variable-speed operation can develop up to 72 metres of head where required. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The three-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 80 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 17.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include industry, irrigation schemes and water supply networks. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Stainless steel manifolds provide two 80 mm manifold connections ready for pipework.
- The system pairs three CRIE 10-5 pumps in parallel duty, controlled as a single coordinated system.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- Each main pump is rated 3 kW (P2), so per-pump draw scales down as speed follows demand.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
What's Included
- 3 x Grundfos CRIE 10-5 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 778 L/Min |
| Max Head | 72 m |
| Power | 3 x 3 kW / 415v |
| Rated Current | 17.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What variable speed electric motors power the parallel pump stages in this booster system?
Electronic speed regulation across the Grundfos Hydro MPC-E 3 CRIE 10-5 V1 GA-A-A-AG is provided by three variable frequency drive MGE electric motors rated at 3 kW apiece on 3 x 400 V power, modulating motor rpm according to demand.
Under high pressure conditions, what maximum dynamic head does this parallel pump unit deliver?
Hydraulic elevation capability on the Hydro MPC-E 3 CRIE 10-5 generates up to 72 m total dynamic head while supporting a maximum operating pressure rating of 16 bar.
What manifold sizing and check valve arrangement connects the parallel pumps together on this skid?
Common manifolding across the Hydro-MPC-E-3-CRIE-10-5 utilizes DN80 stainless steel suction and discharge pipework with integrated non-return valves and isolating ball valves.
What factory warranty period and Australian service support backs this booster package?
Investment protection for the Hydro MPC E 3 CRIE 10 5 features a genuine Grundfos two-year manufacturer warranty supported by nationwide technical service and replacement components.
Which total water throughput does this packaged booster unit maintain across peak duty hours?
For high-demand distribution pipework, the 3 CRIE 10-5 (Hydro MPC-E) delivers a peak water displacement rate of 778 L/min across its parallel multistage pump assembly.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us