Roll over image to zoom
SKU: 93637574
Grundfos Hydro MPC-E 3 x CRIE 10-9 Three Phase 3 x 7.5kW 304ss Booster System w/18L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Across installations such as residential towers and medium commercial sites outgrowing their mains pressure, the Hydro MPC-E 3 CRIE 10-9 maintains stable pressure at every draw-off point. One factory-tested package replaces a shelf of loose components; order part number 93637574 to put it on site.
The system supports flow rates up to 778 L/min. It can develop up to 131 metres of head for dependable pressure boosting. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The three-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 65 mm manifold connections, valves, sensors and a pressure gauge, plus a 18L diaphragm tank. Electrical supply is 3 x 415 V at 50 Hz with a rated current of 30.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Expect it on irrigation schemes and industry sites, plus commercial buildings duties. It provides clean-water pressure boosting for both new plant rooms and refits.
Features
- Three Grundfos CRIE 10-9 pumps share the boosting work in parallel.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Each pump is driven by permanent magnet motors with frequency-controlled speed matching demand.
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Rated 7.5 kW (P2) on every main pump in the frame.
- The set ships with an 18L precharged diaphragm tank for low-flow stability.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- The stainless steel manifold assembly is supplied with two 65 mm manifold connections.
What's Included
- 3 x Grundfos CRIE 10-9 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 18L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 778 L/Min |
| Max Head | 131 m |
| Power | 3 x 7.5 kW / 415v |
| Rated Current | 30.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which inlet and outlet connection dimensions are provided on the stainless steel manifolds?
Header plumbing on the Grundfos Hydro MPC-E 3 CRIE 10-9 V1 GA-A-A-AG provides DN65 stainless steel suction and discharge connections accompanied by isolating valves and discharge check valves.
How is this packaged multi pump booster set supported under manufacturer warranty?
Protection on the Hydro MPC-E 3 CRIE 10-9 is provided by a comprehensive Grundfos two-year manufacturer warranty with extensive Australian technical service and spare parts support.
Under maximum water demand, what delivery flow volume can this multi pump package maintain?
Under maximum network draw, the Hydro-MPC-E-3-CRIE-10-9 supplies a peak fluid flow rate of up to 778 L/min across its variable speed centrifugal stages.
What electric motor power and supply voltage powers each pump in this packaged booster set?
Propulsion across the Hydro MPC E 3 CRIE 10 9 is supplied by three variable frequency drive MGE electric motors rated at 7.5 kW each, operating on a 3 x 415 V electrical supply with integrated frequency converters for precise pressure control.
Which system working pressure and maximum vertical head does this multi stage booster unit produce?
For vertical pressure boosting, the 3 CRIE 10-9 (Hydro MPC-E) produces up to 131 m total elevation head with a 16 bar maximum working pressure envelope.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us