Roll over image to zoom
SKU: 93637538
Grundfos Hydro MPC-E 3 x CRIE 5-12 Three Phase 3 x 3kW 304ss Booster System w/18L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Day spas and compact medical centres running half a dozen outlets at once get a constant-pressure answer in this Grundfos Hydro MPC-E 3 CRIE 5-12 set. Everything is ordered under the single part number 93637538.
It handles flows up to 486 L/min across the system. The pumps can develop up to 137 metres of head when pressure demand increases. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
Factory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus a 18L diaphragm tank. It connects to a 3 x 415 V supply at 50 Hz with a rated current of 17.7 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Applications include high-rise developments, irrigation schemes and commercial buildings. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Each main pump is rated 3 kW (P2), so per-pump draw scales down as speed follows demand.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Three Grundfos CRIE 5-12 vertical multistage pumps run in parallel on one common base frame.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- The set ships with an 18L precharged diaphragm tank for low-flow stability.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
What's Included
- 3 x Grundfos CRIE 5-12 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 18L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 486 L/Min |
| Max Head | 137 m |
| Power | 3 x 3 kW / 415v |
| Rated Current | 17.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electric motor configuration and voltage specification powers this packaged booster set?
Electronic speed regulation across the Grundfos Hydro MPC-E 3 CRIE 5-12 V5 GA-A-A-AG is provided by three variable frequency drive MGE electric motors rated at 3 kW apiece on 3 x 415 V power, modulating motor rpm according to demand.
What dynamic elevation head and line pressure rating applies to this packaged booster assembly?
Hydraulic elevation capability on the Hydro MPC-E 3 CRIE 5-12 generates up to 137 m total dynamic head while supporting a maximum operating pressure rating of 16 bar.
How are the inlet and outlet manifolds plumbed and isolated for maintenance across the pumps?
Common manifolding across the Hydro-MPC-E-3-CRIE-5-12 utilizes R 2" stainless steel suction and discharge pipework with integrated non-return valves and isolating ball valves.
Which warranty protection and technical support covers this packaged booster assembly?
Investment protection for the Hydro MPC E 3 CRIE 5 12 features a genuine Grundfos two-year manufacturer warranty supported by nationwide technical service and replacement components.
What volumetric liquid delivery can this multi pump package supply for building water distribution?
For high-demand distribution pipework, the 3 CRIE 5-12 (Hydro MPC-E) delivers a peak water displacement rate of 486 L/min across its parallel multistage pump assembly.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us