Roll over image to zoom
SKU: 93637811
Grundfos Hydro MPC-E 3 x CRIE 5-12 Three Phase 3 x 3kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Where childcare centres and clinic fitouts that live on steady warm-water supply are served from a single booster, the Hydro MPC-E 3 CRIE 5-12 holds pressure steady as three CRIE 5-12 pumps respond to changing flow. One factory-tested package replaces a shelf of loose components; order part number 93637811 to put it on site.
Flow capacity reaches 503 L/min. Up to 118 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
Factory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 3 x 400 V supply at 50 Hz with a rated current of 17.7 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers water supply networks, irrigation schemes and commercial buildings. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- A suction-side pressure sensor guards the pumps against dry running.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Power use precisely tracks demand, avoiding the waste of fixed-speed alternates.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Three Grundfos CRIE 5-12 pumps share the boosting work in parallel.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Each main pump is rated 3 kW (P2), so per-pump draw scales down as speed follows demand.
What's Included
- 3 x Grundfos CRIE 5-12 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 503 L/Min |
| Max Head | 118 m |
| Power | 3 x 3 kW / 415v |
| Rated Current | 17.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What factory warranty period and support terms cover this multi pump booster unit?
The complete factory package of the Grundfos Hydro MPC-E 3 CRIE 5-12 V1 GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
What peak water delivery flow rate does this multi pump booster package provide?
Meeting high volumetric requirements, the Hydro MPC-E 3 CRIE 5-12 achieves a maximum water delivery capacity of 503 L/min through coordinated parallel pump operation.
What electric drive motors and inverter units power the centrifugal wet ends on this skid?
Mechanical drive on the Hydro-MPC-E-3-CRIE-5-12 features three inverter-controlled variable frequency drive MGE electric motors producing 3 kW per pump, powered by a 3 x 400 V connection for energy-optimised water delivery.
How much total elevation head can this variable speed multi pump package generate?
Discharge pressure performance allows the Hydro MPC E 3 CRIE 5 12 to achieve up to 118 m maximum dynamic head under a 16 bar rated system pressure.
How are the suction and discharge manifolds plumbed to provide individual pump isolation?
Interconnecting pipework on the 3 CRIE 5-12 (Hydro MPC-E) features factory-fitted R 2" stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us