Roll over image to zoom
SKU: 93637528
Grundfos Hydro MPC-E 3 x CRIE 5-5 Single Phase 3 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Childcare centres and clinic fitouts that live on steady warm-water supply rely on booster systems with no tolerance for pressure variation, and the Hydro MPC-E 3 CRIE 5-5 is engineered for exactly that duty. Everything is ordered under the single part number 93637528.
It handles flows up to 505 L/min across the system. The pumps can develop up to 49 metres of head when pressure demand increases. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
Factory assembled on a common base, the set combines stainless steel pipework, two 50 mm manifold connections, isolation and non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It connects to a 1 x 400 V supply at 50 Hz with a rated current of 9.3 A. Motors are protected to IP54, while maximum system pressure is 16 bar. Liquid-temperature suitability is 5°C to 60°C.
Typical duty sits with water supply networks, industry and irrigation schemes. It is designed for clean-water pressure boosting where demand varies through the day.
Features
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- Each main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Three Grundfos CRIE 5-5 vertical multistage pumps run in parallel on one common base frame.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
What's Included
- 3 x Grundfos CRIE 5-5 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 505 L/Min |
| Max Head | 49 m |
| Power | 3 x 1.5 kW / 415v |
| Rated Current | 9.3 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which factory warranty coverage and service terms apply to this booster assembly?
The complete factory package of the Grundfos Hydro MPC-E 3 CRIE 5-5 V1 GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
What total water pumping volume can this packaged multi pump assembly achieve at peak system duty?
Meeting high volumetric requirements, the Hydro MPC-E 3 CRIE 5-5 achieves a maximum water delivery capacity of 505 L/min through coordinated parallel pump operation.
What variable frequency motor propulsion powers each pump wet end in this packaged booster skid?
Mechanical drive on the Hydro-MPC-E-3-CRIE-5-5 features three inverter-controlled variable frequency drive MGE electric motors producing 1.5 kW per pump, powered by a 1 x 400 V connection for energy-optimised water delivery.
What dynamic head pressure does this parallel booster package generate across distribution pipework?
Discharge pressure performance allows the Hydro MPC E 3 CRIE 5 5 to achieve up to 49 m maximum dynamic head under a 16 bar rated system pressure.
How are the parallel multistage pumps plumbed into common suction and discharge manifolds?
Interconnecting pipework on the 3 CRIE 5-5 (Hydro MPC-E) features factory-fitted R 2" stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us