Roll over image to zoom
SKU: 93637826
Grundfos Hydro MPC-E 3 x CRNE 10-2 Three Phase 3 x 1.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Residential towers and medium commercial sites outgrowing their mains pressure get a constant-pressure answer in this Grundfos Hydro MPC-E 3 CRNE 10-2 set. Quote part number 93637826 to have it arrive pre-configured and ready for the plant room.
This set provides up to 781 L/min of flow capacity. Variable-speed operation can develop up to 28 metres of head where required. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 80 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 3 x 400 V power at 50 Hz with a rated current of 9.3 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include water supply networks, commercial buildings and irrigation schemes. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Stainless steel manifolds provide two 80 mm manifold connections ready for pipework.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- A suction-side pressure sensor guards the pumps against dry running.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Three Grundfos CRNE 10-2 pumps share the boosting work in parallel.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- Each main pump is rated 1.5 kW (P2), so per-pump draw scales down as speed follows demand.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
What's Included
- 3 x Grundfos CRNE 10-2 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 781 L/Min |
| Max Head | 28 m |
| Power | 3 x 1.5 kW / 415v |
| Rated Current | 9.3 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much elevation lift head does this multi pump booster system generate across the ringmain?
Under peak line requirements, the Grundfos Hydro MPC-E 3 CRNE 10-2 V1 GA-A-A-AG delivers a maximum vertical head of 28 m and accommodates working system pressures up to 16 bar.
What plumbing connections and manifold valve hardware are provided across the booster framework?
Factory pipework configuration on the Hydro MPC-E 3 CRNE 10-2 incorporates DN80 stainless steel manifolds, complete with individual pump isolating valves and line non-return valves.
What manufacturer warranty terms apply to this factory assembled booster skid?
Factory backing for the Hydro-MPC-E-3-CRNE-10-2 includes an authentic Grundfos two-year manufacturer warranty covering the pumps, drive electronics, and skid assembly.
Under full system demand, how much water volume does this parallel pump package discharge?
At full operational capacity, the Hydro MPC E 3 CRNE 10 2 provides up to 781 L/min total water throughput to satisfy heavy facility consumption requirements.
What electric propulsion and frequency inverter technology drives this multi pump set?
Power for the 3 CRNE 10-2 (Hydro MPC-E) is delivered via three high-efficiency variable frequency drive MGE electric motors of 1.5 kW each, wired for a 3 x 400 V electrical supply with built-in speed regulation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us