Roll over image to zoom
SKU: 93637841
Grundfos Hydro MPC-E 3 x CRNE 10-6 Three Phase 3 x 4kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Across installations such as expanding commercial sites whose original mains feed no longer keep pace, the Hydro MPC-E 3 CRNE 10-6 maintains stable pressure at every draw-off point. Quote part number 93637841 to have it arrive pre-configured and ready for the plant room.
Flow capacity reaches 780 L/min. Up to 87 metres of head is available to maintain pressure as demand changes. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 80 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 3 x 400 V power at 50 Hz with a rated current of 22.9 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers industry, high-rise developments and commercial buildings. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- Each pump is driven by permanent magnet motors with frequency-controlled speed matching demand.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- An integrated 8L diaphragm tank carries small draw-offs and limits pump cycling.
- Rated 4 kW (P2) on every main pump in the frame.
- The touch-panel GENIECON interface shows system status and allows direct setpoint changes on the door.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- Three Grundfos CRNE 10-6 vertical multistage pumps run in parallel on one common base frame.
- Stainless steel manifolds provide two 80 mm manifold connections ready for pipework.
What's Included
- 3 x Grundfos CRNE 10-6 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 780 L/Min |
| Max Head | 87 m |
| Power | 3 x 4 kW / 415v |
| Rated Current | 22.9 Amps |
| Suitable For | Commercial Water Supply, Corrosive Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under maximum draw periods, what fluid delivery volume does this parallel booster package maintain?
Operating across its factory curve, the Grundfos Hydro MPC-E 3 CRNE 10-6 V1 GA-A-A-AG discharges up to 780 L/min of clean water to maintain consistent line pressure during peak demand cycles.
How are the pump wet ends powered and speed controlled during variable demand cycles?
Each centrifugal stage of the Hydro MPC-E 3 CRNE 10-6 is driven by a 4 kW variable frequency drive MGE electric motor running on 3 x 400 V power, utilizing built-in variable speed drives to adjust output dynamically.
How much elevation lift and maximum discharge pressure can this multi stage booster unit maintain?
Elevating water across multi-level pipework, the Hydro-MPC-E-3-CRNE-10-6 maintains up to 87 m total dynamic head with an overall 16 bar maximum operating limit.
Which suction and discharge pipe connections and isolating valves are fitted to this package?
Plumbed for rapid site installation, the Hydro MPC E 3 CRNE 10 6 includes DN80 stainless steel headers equipped with dedicated isolating valves, check valves, and pressure transmitters.
What factory warranty protection is provided for this multi pump booster package?
Grundfos provides two-year manufacturer warranty coverage on the 3 CRNE 10-6 (Hydro MPC-E), securing the complete multi-pump package, manifolds, and integrated electronics.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us