Roll over image to zoom
SKU: 93368413
Grundfos Hydro Multi-E 2 x CRNE 32-5 Three Phase 2 x 11kW Variable Speed 304ss Booster Pump Set with 24L Tank
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Mining village accommodation modules operating across rugged conditions rely on the Hydro Multi-E 2 CRNE 32-5. Two Grundfos CRNE 32-5 multistage pumps share the hydraulic load across a common skid, staging smoothly to match real-time draw. Ordering part number 93368413 puts the fully tested booster skid directly onto the plant room floor.
Handling high-volume requirements, the package outputs up to 1600 L/min. Up to 129.3 metres of delivery head is available to keep upper-floor fixtures pressurised. There is no separate central controller to purchase: Multi-Master control resides within the pumps, either unit can assume the controlling role, and a fault is handed over cleanly without interrupting supply.
Manufactured on a common baseplate, the system brings together stainless steel pipework, two 100 mm manifold connections, isolation and non-return valves, pressure sensors, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 / 60 Hz with combined rated current of 39.2 A (2 x 19.6 A per pump). Motors carry IP54 sealing with maximum pressure of 16 bar. Liquid-temperature suitability is 5°C to 60°C, and inlet pressure is rated to 16 bar.
Proven across Australian commercial sectors including hospital surgical wings, aged-care complexes and industrial process supply, the package delivers dependable service. Variable-speed motor modulation makes the set a practical clean-water pressure-boosting solution for both new plant rooms and system upgrades.
FEATURES
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- The system protects its pumps against dry running if the incoming supply is lost.
- Stainless steel manifolds provide two 100 mm manifold connections ready for plant pipework.
- Integrated Grundfos GO compatibility supports configuration, logging and diagnostics from a smartphone.
- An integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Two Grundfos CRNE 32-5 vertical multistage pumps run in parallel on one common base frame.
- Each pump is driven by IE5 permanent magnet motors with frequency-controlled speed matching demand.
- Multi-Master redundancy means either pump can act as controller, with seamless changeover on fault.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- Each main pump is rated 11 kW (P2), so per-pump draw scales down as speed follows demand.
What's Included
- 2 x Grundfos CRNE 32-5 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- 24L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 1600 L/Min |
| Max Head | 129 m |
| Power | 2 x 11 kW / 415v |
| Rated Current | 2 x 19.6 Amps |
| Suitable For | Commercial Water Supply, Process and Food-Grade Duties |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C to 60°C |
| Inlet Size | 100 mm |
| Outlet Size | 100 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which total head pressure does the multi-pump package maintain across the distribution network?
Discharge pressure performance allows the Grundfos Hydro Multi-E 2 CRNE32-5 U2 A-A-I-I-DU (part number 93368413) to achieve up to 129.3 m maximum dynamic head under an 16 bar rated system pressure.
Which pipe connection sizes and manifold isolation valves are fitted across this booster package?
Factory-assembled plumbing on the Hydro Multi-E 2 CRNE32-5 integrates DN 100 stainless steel suction and discharge pipe headers with dedicated isolation and check valves.
How is this packaged booster assembly backed by manufacturer warranty coverage?
Comprehensive warranty coverage on the Hydro-Multi-E-2-CRNE32-5 provides a Grundfos two-year manufacturer warranty backed by extensive Australian distribution and service networks.
What peak fluid volume does this variable speed booster set deliver during high draw periods?
Factory hydraulic data confirms the Hydro Multi E 2 CRNE32 5 provides up to 1600 L/min peak water delivery during high draw.
What electrical motor power and drive electronics operate the pumps on this booster assembly?
Built-in variable speed electronics on the 2 CRNE32-5 (Hydro Multi-E) regulate two 11 kW IE5 permanent-magnet MGE electric motors operating from a 3 x 380-415 V supply.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us