Roll over image to zoom
SKU: 93368449
Grundfos Hydro Multi-E 2 x CRNE 95-1 Three Phase 2 x 11kW Variable Speed 304ss Booster Pump Set with 24L Tank
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Boutique apartment towers juggling simultaneous morning showers depend on the Hydro Multi-E 2 CRNE 95-1 for steady line pressure. Two Grundfos CRNE 95-1 multistage pumps share the hydraulic load across a common skid, staging smoothly to match real-time draw. Quote part number 93368449 to have the entire pre-commissioned assembly delivered to site.
Supplying up to 5000 L/min at peak simultaneous commercial draw, Up to 45.7 metres of shut-off head is generated to overcome vertical riser friction. There is no separate central controller to purchase: Multi-Master control resides within the pumps, either unit can assume the controlling role, and a fault is handed over cleanly without interrupting supply.
Arriving fully assembled for plant room placement, the system combines stainless steel manifolds, two 200 mm manifold connections, isolation and non-return valves, pressure sensors, plus a 24L diaphragm tank. It connects to a 3 x 380-415 V supply at 50 / 60 Hz with combined rated current of 27.2 A (2 x 13.6 A per pump). Motors carry IP54 sealing with maximum pressure of 10 bar. Liquid-temperature suitability is 5°C to 60°C, and inlet pressure is rated to 10 bar.
Typical building services installations encompass hospital surgical wings, aged-care complexes and industrial process supply, requiring adaptive line stability. Variable-speed motor modulation makes the set a practical clean-water pressure-boosting solution for both new plant rooms and system upgrades.
FEATURES
- Pumps are cut in and out according to demand, every running unit turning at the same speed to hold the pressure set point.
- Multi-Master redundancy means either pump can act as controller, with seamless changeover on fault.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- Each pump is driven by IE5 permanent magnet motors with frequency-controlled speed matching demand.
- At P2 each main pump is 11 kW, covering the duty without oversizing the frame.
- Maximum operating pressure of 10 bar with motors sealed to IP54.
- An integrated 24L diaphragm tank carries small draw-offs and limits pump cycling.
- Dry-running protection is built into the control, protecting the pumps if the suction supply is interrupted.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- Two Grundfos CRNE 95-1 vertical multistage pumps run in parallel on one common base frame.
- Stainless steel manifolds provide two 200 mm manifold connections ready for plant pipework.
- The controller tracks the pressure setpoint with proportional deviation alerts before conditions become faults.
- Integrated Grundfos GO compatibility supports configuration, logging and diagnostics from a smartphone.
What's Included
- 2 x Grundfos CRNE 95-1 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- 24L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 5000 L/Min |
| Max Head | 45 m |
| Power | 2 x 11 kW / 415v |
| Rated Current | 2 x 13.6 Amps |
| Suitable For | Commercial Water Supply, Process and Food-Grade Duties |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C to 60°C |
| Inlet Size | 200 mm |
| Outlet Size | 200 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electric motor drive configuration powers each centrifugal pump within this booster package?
Propulsion across the Grundfos Hydro Multi-E 2 CRNE95-1 U2 A-A-I-I-DU (part number 93368449) is supplied by two IE5 permanent-magnet MGE electric motors rated at 11 kW each on a 3 x 380-415 V electrical supply.
Which vertical elevation head and system pressure rating applies to this multi-pump skid?
Elevating water across multi-level pipework, the Hydro Multi-E 2 CRNE95-1 maintains up to 45.7 m total dynamic head with an overall 10 bar operating limit.
What plumbing connection dimensions and manifold check valves are installed on this assembly?
Hydraulic header plumbing across the Hydro-Multi-E-2-CRNE95-1 incorporates DN 200 stainless steel suction and discharge manifolds with built-in non-return valves and isolating valves.
How is this variable speed booster skid supported by Grundfos manufacturer warranty?
Long-term operational backing for the Hydro Multi E 2 CRNE95 1 includes an authentic Grundfos two-year manufacturer warranty covering the parallel pumps, manifolds, and skid frame.
How much water transfer volume can this packaged booster assembly maintain across peak usage cycles?
Parallel pump operation enables the 2 CRNE95-1 (Hydro Multi-E) to discharge a peak water volume of 5000 L/min into header pipework.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us