Roll over image to zoom
SKU: 93208694
Grundfos NB 32-200.1/205 Cast Iron 5.5 kW End Suction Centrifugal Pump with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Operating with a 5.5 kW motor rating, the NB 32-200.1/205 end-suction centrifugal pump features end-suction axial inlet (DN 50) and top radial outlet (DN 32) connections. The pump is specified for district heating, commercial air conditioning loops, and industrial water distribution.
The pump's hydraulic assembly yields 372 L/Min rated flow volume and a maximum operational head of 43.54 m. Structural strength relies on an EN-GJL-250 cast iron casing with cataphoresis coating. Internal hydraulics feature a stainless steel impeller and BQQE shaft seal. Physical product weight equals 106 kg.
The NB 32-200.1/205 pump's 415 V three-phase drive motor delivers 5.5 kW power output while drawing 10.5 Amps operating current. The pump accommodates circulating fluid temperatures from -25°C to 120°C under working pressures up to 16 bar. Standardized DN 50 suction and DN 32 discharge ports facilitate line placement.
An IP55 enclosure rating protects motor components on the NB 32-200.1/205 unit, backed by Class F insulation and built-in PTC thermistor sensors. Scheduled maintenance routines utilize back-pull-out access, enabling motor drive and impeller removal while leaving volute casing flange joints intact.
Features
- ATEX Zone 1, 2, 21 or 22 certification available for operation in potentially explosive atmospheres (except E-model variants).
- Integrally cast suction and discharge ports with dedicated vent and drain ports provide direct connection points without additional fittings.
- No baseplate or grouting required to maintain correct shaft alignment and vibration levels within Hydraulic Institute standards.
- Cataphoretic electrocoating on cast iron internal surfaces provides barrier protection against oxidative corrosion in hydronic circulation loops.
- Close-coupled configuration eliminates coupling alignment procedures and reduces overall installation footprint compared to long-coupled alternatives.
- Ball bearing support arrangement accommodates both radial and axial thrust loads generated during continuous duty operation at rated speed.
- PN16 flanged connection ratings on sizes up to and including DN 150 provide elevated working pressure capability beyond standard EN733 10 bar ratings.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 372 L/Min |
| Max Head | 43.54 m |
| Power | 5.5 kW / 415v |
| Rated Current | 10.5 Amps |
| Suitable For | Industrial Water Infrastructure |
| Body Material | Cast Iron |
| Liquid Temperature | '-25°C to 120°C |
| Inlet Size | 50 mm |
| Outlet Size | 32 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What corrosion-resistant materials are used in the wetted components?
Durable EN-GJL-250 construction gives the Grundfos NB 32-200.1/205 exceptional structural strength and long-term protection against corrosive fluids.
What electrical connection and motor power run this pump?
Powered by a dedicated 5.5 kW motor, the NB 32-200.1/205 connects to 415 V three-phase mains power with a rated current draw of 10.5 Amps.
What submersion depth limits and fluid temperatures apply to this pump?
Operating comfortably across temperatures -25°C to 120°C, the NB-32-200-1-205 supports diverse fluid circuits.
How much vertical head pressure can this pump generate?
Under rated operating head, the NB 32 200 1 205 can lift water to a maximum dynamic head of approximately 43.54 m through vertical risers.
How much water flow can this pump deliver per minute?
Peak fluid displacement on the NB/32/200/1/205 delivers up to 372 L/Min under rated operating conditions.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us