Roll over image to zoom
SKU: 96810511
Grundfos S3.120.600.350.10.66E.C.470 Ductile Cast Iron 10-Pole Sewage Pump for Flood Management with 3-Channel Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Operating at only 585 rpm with flow capacity of 45000 L/min, the Grundfos S3.120.600.350.10.66E.C.470.G.N.D.513GPA 10-pole submersible sewage pump handles wastewater, process water and unscreened raw sewage across Australia where extremely high flow rates at low heads are required. The Variant C cooling jacket supports continuous submerged operation at depths up to 20 m as part of the Range 66 series.
A 35 kW motor (P2) at 585 rpm from a 415 V three-phase supply draws 77 A with 88% efficiency at both full and 3/4 load. Maximum head is 7.2 m, with DN600 outlet and DN120 inlet connections carrying a PN10 pressure rating for this configuration.
Hydraulic performance is provided by a 3-channel ductile iron impeller with 120 mm free passage, with the 470 mm impeller diameter and triple-channel configuration matched to the E lifting height class requirements. The impeller geometry determines the head and flow characteristics for this Range 66 model, with the pump housing constructed from ductile cast iron and CE and EAC markings present on the nameplate.
Ductile cast iron construction with IP68 enclosure and Class F insulation provides submerged durability, with primary silicon carbide and secondary silicon carbide-carbon shaft seals preventing liquid ingress. Integrated moisture sensors are fitted as standard, and the 15 m H07RN-F AT cable supports Star/Delta starting.
FEATURES
- Ten-pole motor design operating at 585 rpm for very low-speed high-volume transfer applications
- Triple-channel ductile iron impeller providing stable hydraulic performance across the operating range
- 120 mm free passage through the impeller and volute for solids and unscreened sewage particulates
- Ductile cast iron pump housing providing enhanced material strength for demanding wastewater applications
- DN600 outlet connection and DN120 inlet connection with PN10 pressure rating
- IP68 enclosure protection for continuous submerged operation at depths up to 20 metres
- Variant C integrated cooling jacket surrounding the motor stator for heat dissipation during operation
- CE and EAC certification markings present on the product nameplate as specified by the manufacturer
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 45000 L/Min |
| Max Head | 7.2 m |
| Power | 35 kW / 415v |
| Rated Current | 77 Amps |
| Suitable For | Drainage Pump Stations |
| Body Material | Ductile cast iron |
| Liquid Temperature | 0°C to +40°C |
| Inlet Size | 600 mm |
| Outlet Size | 600 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What peak dynamic elevation does this pump develop?
To overcome vertical elevation resistance, the Grundfos S3.120.600.350.10.66E.C.470 develops a maximum pumping head of approximately 20 m.
What total dynamic head can this pump overcome in vertical pipework?
Pumping performance for the S3.120.600.350.10.66E.C.470 provides up to 7.2 m of vertical dynamic lift, depending on system friction and line sizing.
What is the maximum water volume this pump can discharge?
Moving liquid through the system, the S3-120-600-350-10-66E-C-470 maintains an operational throughput of up to 45000 L/Min through a DN 600 connection during peak demand.
What materials are used to construct the pump casing and impeller?
Built with a resilient high-grade alloy body, the S3 120 600 350 10 66E C 470 maintains material durability against fluid abrasion and wear.
What are the power requirements and running amperage for this pump?
Connecting across 415 V three-phase lines, the S3/120/600/350/10/66E/C/470 draws approximately 77 A with an efficient 35 kW motor.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us