Roll over image to zoom
SKU: 96087139
Grundfos TP 50-190/4 Cast Iron 2.2kW Three Phase Inline Centrifugal Pump with Bronze Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Featuring a top-pull-out structural design, the TP 50-190/4 inline pump allows service access to the electric motor and bronze impeller assembly without disconnecting the pump body from connected piping. The pump handles clean water fluid circulation across commercial HVAC distribution loops under continuous operation.
The hydraulic wet-end achieves a rated flow capacity of 439 L/Min with a maximum head rating of 19 m. Cast iron housing materials provide solid pressure containment up to 16 bar. The internal assembly houses a bronze impeller fitted with bronze wear rings. Net equipment weight is 81.6 kg.
Power specifications call for a 415 V three-phase electrical supply rated at 2.2 kW motor power. Current draw under load measures 4.4 Amps. Operating fluid temperatures span -25°C to 120°C with a maximum working pressure rating of 16 bar. The housing features opposite DN 50 flanged ports for mounting.
The electric motor carries an IP55 ingress protection rating alongside Class F thermal insulation and integrated PTC thermistors. System maintenance relies on top-pull-out architecture, enabling drive head disassembly while the pump casing stays secured to pipe runs.
Features
- 2.2 kW motor driving a bronze impeller to produce 439 L/Min at 19 m head.
- EN-GJL-250 cast iron volute with cataphoresis electrocoating for hydronic loop service.
- Opposite DN 50 flanged ports enabling direct insertion into commercial pipework runs.
- 4.4 Amps rated current draw at 415 V three-phase supply voltage.
- BQQE mechanical shaft seal with bronze wear rings for clean water circulation duty.
- IP55 motor enclosure rated for dust and water spray protection in plant room environments.
- Top-pull-out structural design permitting service access without disturbing pipework connections.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 439 L/Min |
| Max Head | 19 m |
| Power | 2.2 kW / 415v |
| Rated Current | 4.4 Amps |
| Suitable For | Commercial Heating Loops |
| Body Material | Cast Iron |
| Liquid Temperature | '-25°C to 120°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What motor power rating and running current power this pump?
Powered by a dedicated 2.2 kW motor, the Grundfos TP 50-190/4 connects to 415 V three-phase mains power with a rated current draw of 4.4 Amps.
What fluid temperature limits and immersion depths are rated for this unit?
Operating comfortably across temperatures -25°C to 120°C, the TP 50-190/4 supports diverse fluid circuits.
What maximum vertical elevation head can this pump achieve?
Under rated operating head, the TP-50-190-4 can lift water to a maximum dynamic head of approximately 19 m through vertical risers.
How much water volume can this pump displace through its outlet?
Peak fluid displacement on the TP 50 190 4 delivers up to 439 L/Min under rated operating conditions.
How is the pump casing constructed to resist mechanical and fluid wear?
High-grade EN-GJL-250 components in the TP/50/190/4 protect internal passages against corrosive fluid contact.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us