Roll over image to zoom
SKU: 96087463
Grundfos TP 65-170/4 Cast Iron 3kW Three Phase Inline Centrifugal Pump with Bronze Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
System fluid movement in the TP 65-170/4 single-stage centrifugal inline pump is supported by an electric motor drive rated at 3 kW. The unit mounts directly in line with commercial pipework networks using standardized DN 65 flanged connection ports for efficient mounting.
Hydraulic rating calculations confirm a flow capacity of 595 L/Min at a maximum head threshold of 17 m. The volute housing is constructed from cataphoresis treated cast iron. Rotor hydraulics feature a bronze impeller supported by bronze wear rings. Total net weight measures 79.9 kg.
Motor electrical configuration requires a 415 V three-phase connection rated at 3 kW output power. Operating current measures 5.9 Amps at nominal speed. Liquid temperature ranges extend from -25°C to 120°C under 16 bar pressure. Line insertion uses opposite DN 65 flanged connections.
Motor security features an IP55 rated housing, Class F thermal insulation, and PTC thermistor winding relays. The top-pull-out structural geometry permits technicians to remove the motor drive and rotor without dismantling connected pipework lines.
Features
- 3 kW drive motor drawing 5.9 Amps delivering 595 L/Min at 17 m head.
- Cataphoresis-treated EN-GJL-250 cast iron casing for corrosion protection in closed loops.
- DN 65 flanged ports supporting direct inline installation in commercial piping.
- Bronze impeller with bronze wear rings and BQQE shaft seal assembly.
- 16 bar working pressure rating with -25°C to 120°C fluid temperature range.
- IP55 protection standard with Class F thermal insulation and PTC thermistor sensors.
- Top-pull-out service geometry enabling motor head removal without pipe disconnection.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 595 L/Min |
| Max Head | 17 m |
| Power | 3 kW / 415v |
| Rated Current | 5.9 Amps |
| Suitable For | Commercial Air Conditioning |
| Body Material | Cast Iron |
| Liquid Temperature | '-25°C to 120°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How is the pump casing constructed to resist mechanical and fluid wear?
High-grade high-grade alloy components in the Grundfos TP 65-170/4 protect internal passages against corrosive fluid contact.
What electrical supply parameters are needed for this pump motor?
It operates on 415 V three-phase power, with the TP 65-170/4 utilizing a durable 3 kW motor rated at 5.9 Amps.
How deep can this pump be installed underwater in a wet well?
Thermal ratings for the TP-65-170-4 accommodate working liquid temperatures -25°C to 120°C under standard operating pressure.
How much pumping height does this pump provide?
Pumping performance for the TP 65 170 4 provides up to 17 m of vertical dynamic lift, depending on system friction and line sizing.
What peak fluid displacement volume can this pump deliver?
Moving liquid through the system, the TP/65/170/4 maintains an operational throughput of up to 595 L/Min during peak demand.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us