Roll over image to zoom
SKU: 96108873
Grundfos TP 80-110/4 Cast Iron 2.2kW Three Phase Inline Centrifugal Pump with Bronze Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Direct pipework installation is accommodated by the inline port orientation of the TP 80-110/4 centrifugal pump, featuring opposite DN 80 flanged suction and discharge connections. A 2.2 kW electric drive motor provides mechanical power for continuous fluid circulation.
Hydraulic flow delivery achieves approx. 1290 L/Min rated capacity while producing a maximum head threshold of up to 11 m. Cast in EN-GJL-250 iron, the pump housing resists line stress in mechanical rooms. The wet-end houses a bronze impeller with bronze wear rings. Unit net weight equals 82.4 kg.
Driven by a 2.2 kW motor operating on a 415 V three-phase line, the pump draws 4.4 Amps full-load current. Circulating liquid temperatures range from -25°C to 120°C under maximum system pressures of 16 bar. Opposite DN 80 flanged ports allow mounting directly in pipe runs.
Featuring an IP55 motor enclosure with Class F thermal insulation, the motor incorporates PTC thermistor sensors for thermal safety. Top-pull-out mechanical construction enables drive head extraction without removing the pump body from active piping.
Features
- Large-bore DN 80 flanged ports for high-volume commercial fluid transfer.
- 2.2 kW motor drawing 4.4 Amps producing 990 L/Min Maximum flow at up to 11 m head.
- Low-head, high-flow hydraulic design suited for chilled water return circuits.
- EN-GJL-250 cast iron pump body with cataphoresis electrocoating treatment.
- Bronze impeller rotor assembly with BQQE mechanical seal for clean water applications.
- IP55 rated motor housing with Class F insulation and PTC thermistor protection.
- Top-pull-out construction enabling drive access without disturbing main pipe connections.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 1290 L/Min |
| Max Head | 11 m |
| Power | 2.2 kW / 415v |
| Rated Current | 4.4 Amps |
| Suitable For | Chilled Water Circulation |
| Body Material | Cast Iron |
| Liquid Temperature | -25°C to 120°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How deep can this pump be installed underwater in a wet well?
Thermal ratings for the Grundfos TP 80-110/4 accommodate working liquid temperatures -25°C to 120°C under standard operating pressure.
How high can this pump lift water vertically?
Pumping performance for the TP 80-110/4 provides up to 11 m of vertical dynamic lift, depending on system friction and line sizing.
What maximum flow rate does this pump achieve during heavy influx?
Moving liquid through the system, the TP-80-110-4 achieves a maximum flow of up to approx. 1290 L/Min at maximum flow.
What corrosion-resistant materials are used in the wetted components?
Built with a resilient high-grade alloy body, the TP 80 110 4 maintains material durability against fluid abrasion and wear.
How much power does the motor consume during standard operation?
Connecting across 415 V three-phase lines, the TP/80/110/4 draws approximately 4.4 Amps with an efficient 2.2 kW motor.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us