Roll over image to zoom
SKU: ESHS25-125/07
Lowara ESHS25 125/07 Stainless Steel Stub Shaft Centrifugal Pump for Utility Systems with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Integrating seamlessly into utility systems, this equipment provides dependable fluid handling for commercial water transfer networks. Facility engineers utilize this unit to distribute mildly aggressive liquids across industrial facilities, maintaining precise environmental tolerances within complex distribution architectures.
Operating parameters define a Max Head reaching approximately 14.1 m alongside a Max Flow of approximately 318 L/Min. Electrical requirements mandate a 415v three-phase power source, drawing 1.71 Amps to engage the 0.75 kW drive. The flanged piping configuration consists of a 50 mm suction inlet and a 25 mm radial discharge port.
Fluid motion is directed through a precisely machined single-stage centrifugal chamber equipped with a balanced enclosed impeller. The mechanical assembly utilizes an end-suction, stub shaft bracket that keys the standard motor extension directly to the fluid mechanics, promoting excellent suction capabilities and stable flow behaviour.
To resist chemical wear, the housing and internal components are crafted from AISI 316 stainless steel. The sealing housing features a Ceramic/Carbon mechanical seal with FKM elastomers. The entire unit is classified under an IP55 protection degree with Class 155 (F) insulation to accommodate liquid temperatures ranging from -10 °C to +120 °C.
FEATURES
- Single-stage end-suction hydraulic architecture
- Stub shaft coupling utilizing an adapter bracket
- Complete AISI 316 stainless steel material specification
- Standardized Ceramic, Carbon, and FKM elastomer seal
- IP55 enclosed motor protection degree for industrial safety
- Insulation Class 155 (F) to safeguard internal electronics
- Supported operating liquid temperatures up to +120 °C
SPECIFICATIONS
| Max Flow | 318 L/Min |
| Max Head | 14.1 m |
| Power | 0.75 kW / 415v |
| Rated Current | 1.71 Amps |
| Suitable For | Industrial Process Water Handling |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | '-10°C to +120°C |
| Inlet Size | 50 mm |
| Outlet Size | 25 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
To defend against corrosive liquid attack, what alloy metallurgy and mechanical seals are built into this stainless steel end-suction centrifugal pump?
Reinforced with alloy metallurgy components, the ESHS25-125/07 relies on alloy construction of AISI 316 stainless steel pump casing, diffusers, and closed impellers paired with mechanical face seals to withstand liquid corrosion.
Which electrical motor power specifications and operating voltage current feed energize this stainless steel end-suction centrifugal pump?
Configured by commercial electrical feeds, the ESHS25-125-07 features an electric motor rated at 0.75 kW (1.0 HP) powered by 380–415 V, 50 Hz, three-phase with a rating of 1.71 A.
What operating pressure boundaries and permissible fluid temperature range govern this stainless steel end-suction centrifugal pump?
Guaranteed under certified hydraulic pressure, the ESHS25 125 07 maintains a maximum working pressure rating of 12 bar (PN 12) across fluid operating temperatures from -10°C to +120°C.
Under system head resistance, what peak dynamic elevation does this stainless steel end-suction centrifugal pump achieve?
Maintaining across vertical pipe runs, the ESHS25_125_07 develops a maximum dynamic elevation head of approximately 14.1 m to elevate water.
When operating across plumbing networks, what maximum flow volume and connection port sizes apply to this stainless steel end-suction centrifugal pump?
Directing across connected plumbing lines, the ESHS25-125/07 provides a peak fluid flow rate of approximately 318 L/Min connecting via DN 50 suction and DN 25 discharge flanged ports.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us