Roll over image to zoom
SKU: ESHS32-160/15
Lowara ESHS32 160/15 Stainless Steel End Suction Centrifugal Pump for Fluid Routing with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Supporting critical fluid scaling operations, this equipment is deployed primarily for industrial clean water handling and commercial supply networks. Engineers integrate this system to process non-aggressive liquids, ensuring consistent facility utility management within varying operational environments.
The technical documentation specifies a Max Head reaching approximately 23.3 m and a Max Flow scaling to approximately 402 L/Min. This specific model consumes 3.18 Amps during operation and requires a 415v three-phase power source for its 1.5 kW motor. The flanged piping setup consists of a 50 mm suction inlet and a 32 mm outlet.
Circulation characteristics are established by a horizontal single-stage hydraulic layout. An adapter bracket with a stub shaft keys the motor strictly to the precisely machined closed impeller. This structural configuration sustains excellent suction capabilities while minimizing internal turbulence across the designated commercial performance curve.
To resist environmental degradation, the main casing and rotating counter-wear rings are constructed entirely from AISI 316 stainless steel. Fluid containment relies on a factory-fitted Ceramic, Carbon, and FKM mechanical mechanism. Thermal endurance is verified for liquids ranging from -10 °C up to +120 °C, protected by an IP55 electrical enclosure.
FEATURES
- End-suction geometry featuring a single-stage centrifugal chamber
- Complete AISI 316 stainless steel material specification
- Rigid stub shaft bracket minimizing mechanical deviation
- Fluid containment via an FKM and Ceramic/Carbon seal
- Designed for 415v three-phase industrial installations
- Insulation Class 155 (F) protecting internal motor circuitry
- Back pull-out architecture for simplified routine maintenance
SPECIFICATIONS
| Max Flow | 402 L/Min |
| Max Head | 23.3 m |
| Power | 1.5 kW / 415v |
| Rated Current | 3.18 Amps |
| Suitable For | Process Water Handling |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | '-10°C to +120°C |
| Inlet Size | 50 mm |
| Outlet Size | 32 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Regarding electrical system integration, what motor kilowatt rating and supply voltage current energize this stainless steel end-suction centrifugal pump?
Outfitted from standard electrical distribution, the ESHS32-160/15 connects to 380–415 V, 50 Hz, three-phase with an electric motor rated at 1.5 kW (2.0 HP) requiring 3.18 A.
Under severe operational pressure, what operating pressure limit and liquid temperature are sustained by this stainless steel end-suction centrifugal pump?
Supporting across commercial fluid lines, the ESHS32-160-15 supports a maximum working pressure capability of 12 bar (PN 12) and liquid temperatures from -10°C to +120°C.
What upward dynamic elevation head can this stainless steel end-suction centrifugal pump maintain under load?
Supplying through tall plumbing risers, the ESHS32 160 15 generates a peak dynamic lift head of approximately 23.3 m under upward push.
What peak flow rate in liters per minute and discharge port diameter are certified on this stainless steel end-suction centrifugal pump?
Channeling through primary discharge ports, the ESHS32_160_15 discharges a maximum delivery flow volume of approximately 402 L/Min utilizing DN 50 suction and DN 32 discharge flanged ports.
How do the alloy casing and mechanical seal metallurgy resist fluid corrosion in this stainless steel end-suction centrifugal pump?
Outfitted for aggressive liquid service, the ESHS32-160/15 combines alloy metallurgy of AISI 316 stainless steel pump casing, diffusers, and closed impellers with precision mechanical seals to defend against chemical attack.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us