Roll over image to zoom
SKU: ESHS65-160/75
Lowara ESHS65 160/75 Stainless Steel End Suction Centrifugal Pump for Liquid Transfer with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Addressing the fluid transfer requirements of commercial water supply and large utility networks, this single stage end suction pump delivers targeted liquid management across high-capacity infrastructure. Facility operators rely on this unit to handle clear water and mildly aggressive fluids, ensuring consistent operational parameters are safely met.
Technical specifications outline a Max Head scaling to approximately 28.4 m alongside a Max Flow of approximately 1884 L/Min. The electrical architecture demands a 415v three-phase supply, utilizing 14.0 Amps to power the 7.5 kW industrial drive. The physical piping connections consist of an 80 mm flanged intake port and a 65 mm radial discharge port.
Hydraulic momentum is controlled through a precision-engineered centrifugal chamber utilizing an axial end-suction geometry. The physical framework incorporates a stub shaft adapter bracket, which keys the standard motor extension directly to the enclosed impeller. This rigid mechanical coupling minimizes alignment deviation during continuous heavy runtimes.
Constructed utilizing heavy-duty cast stainless steel (1.4408) for its wetted elements, the pump strongly resists long-term material degradation. The internal shaft relies on a standardized Ceramic/Carbon mechanical seal integrated with FKM elastomers to prevent fluid ingress. The motor features an IP55 protection degree, safely tolerating liquid temperatures from -10 °C to +120 °C.
FEATURES
- Single stage end suction layout with horizontal shaft configuration
- Cast stainless steel (1.4408) wetted components for structural durability
- Direct stub shaft rigid coupling via a dedicated adapter bracket
- Standardized Ceramic, Carbon, and FKM mechanical seal
- Three-phase 415v compatibility for industrial electrical grids
- Class 155 (F) insulation to safeguard internal motor windings
- Rated for maximum system operating pressures up to 12 bar
SPECIFICATIONS
| Max Flow | 1884 L/Min |
| Max Head | 28.4 m |
| Power | 7.5 kW / 415v |
| Rated Current | 14 Amps |
| Suitable For | Industrial Liquid Transfer |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | '-10°C to +120°C |
| Inlet Size | 80 mm |
| Outlet Size | 65 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Regarding material protection, what alloy metallurgy and mechanical seal faces are specified on this stainless steel end-suction centrifugal pump?
Protected with alloy metallurgy components, the ESHS65-160/75 relies on alloy construction of AISI 316 stainless steel pump casing, diffusers, and closed impellers paired with mechanical face seals to withstand liquid corrosion.
Which motor power kilowatt rating and line voltage current feed are engineered into this stainless steel end-suction centrifugal pump?
Designed by commercial electrical feeds, the ESHS65-160-75 features an electric motor rated at 7.5 kW (10.0 HP) powered by 380–415 V, 50 Hz, three-phase with a rating of 14.0 A.
How do the maximum working pressure rating and permissible fluid temperature protect this stainless steel end-suction centrifugal pump?
Delivering under certified hydraulic pressure, the ESHS65 160 75 maintains a maximum working pressure rating of 12 bar (PN 12) across fluid operating temperatures from -10°C to +120°C.
How much upward dynamic head does this stainless steel end-suction centrifugal pump provide across vertical pipe runs?
Transferring across vertical pipe runs, the ESHS65_160_75 develops a maximum dynamic elevation head of approximately 28.4 m to elevate water.
When operating under hydraulic demand, what delivery flow volume and connection diameter does this stainless steel end-suction centrifugal pump provide?
Moving across connected plumbing lines, the ESHS65-160/75 provides a peak fluid flow rate of approximately 1884 L/Min connecting via DN 80 suction and DN 65 discharge flanged ports.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us