Roll over image to zoom
SKU: ESHS80-200/220
Lowara ESHS80 200/220 Stainless Steel Single Stage Centrifugal Pump for Water Transfer with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Functioning reliably in heavy-scale commercial networks, this high-capacity stainless steel end suction centrifugal stub shaft motor pump controls process water routing across complex industrial circulation systems. It effectively addresses the strict pressure management requirements of commercial architecture and water treatment plants processing clear or mildly aggressive liquids.
Operating parameters define a Max Head of approximately 51.2 m combined with a Max Flow of approximately 3486 L/Min. Electrical prerequisites require a 415v three-phase power source, drawing 42.6 Amps to engage the highly efficient 22.0 kW drive. The physical piping interface features a 100 mm suction inlet and an 80 mm outlet dimension.
Circulation characteristics are managed by a single stage horizontal hydraulic layout equipped with a precisely balanced closed impeller. The mechanical assembly relies on a stub shaft bracket that directly keys the motor to the fluid mechanics. This provides steady suction capabilities and highly efficient delivery across the targeted performance curve.
Constructed utilizing heavy-duty cast stainless steel (1.4408), this pump provides exceptional operational endurance against environmental wear. The shaft relies on a standard Ceramic/Carbon/FKM mechanical seal arrangement, while the motor is classified under an IP55 protection degree for safe usage in temperatures ranging from -10 °C to +120 °C.
FEATURES
- Single stage horizontal hydraulic architecture with radial discharge
- Direct stub shaft coupling configuration utilizing an adapter bracket
- Cast stainless steel (1.4408) specification for all wetted parts
- Standardized FKM elastomer paired with Ceramic/Carbon sealing
- Flanged suction (100 mm) and radial discharge (80 mm) ports
- IP55 motor protection degree suitable for industrial facility floors
- Operates safely within liquid temperature variations up to +120 °C
SPECIFICATIONS
| Max Flow | 3486 L/Min |
| Max Head | 51.2 m |
| Power | 22 kW / 415v |
| Rated Current | 42.6 Amps |
| Suitable For | Industrial Process Water Handling |
| Body Material | AISI 316 Stainless Steel |
| Liquid Temperature | '-10°C to +120°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Regarding facility electrical integration, what motor power in kilowatts and operating voltage feed run this stainless steel end-suction centrifugal pump?
Built from standard electrical distribution, the ESHS80-200/220 connects to 380–415 V, 50 Hz, three-phase with an electric motor rated at 22 kW (30.0 HP) requiring 42.6 A.
What maximum working pressure limit and permissible fluid operating temperature govern this stainless steel end-suction centrifugal pump?
Enduring across commercial fluid lines, the ESHS80-200-220 supports a maximum working pressure capability of 12 bar (PN 12) and liquid temperatures from -10°C to +120°C.
When pushing water upward, what dynamic elevation head does this stainless steel end-suction centrifugal pump provide?
Circulating through tall plumbing risers, the ESHS80 200 220 generates a peak dynamic lift head of approximately 51.2 m under upward push.
What peak flow rate in liters per minute and connection port dimensions are provided by this stainless steel end-suction centrifugal pump?
Releasing through primary discharge ports, the ESHS80_200_220 discharges a maximum delivery flow volume of approximately 3486 L/Min utilizing DN 100 suction and DN 80 discharge flanged ports.
In demanding water transfer, what alloy construction and mechanical face seals defend this stainless steel end-suction centrifugal pump against corrosion?
Specified for aggressive liquid service, the ESHS80-200/220 combines alloy metallurgy of AISI 316 stainless steel pump casing, diffusers, and closed impellers with precision mechanical seals to defend against chemical attack.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us