Roll over image to zoom
SKU: Z895-03/2B-3S
Lowara Z895-03/2B-3S Stainless Steel 18.5kW Deep Well 8" Submersible Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Groundwater lifting for large-scale agricultural systems and municipal networks is facilitate by the Z895-03/2B-3S multistage submersible unit. This model features a 316 Stainless Steel motor and belongs to the Lowara Z895 range, offering high-volume extraction for distribution tasks. It is designed for vertical borehole installation or horizontal mounting in reservoirs provided the motor remains at the lowest point.
Manufactured from cast 304 Stainless Steel, the suction support and diffusers provide structural rigidity for Aggressive media environments. The three-stage hydraulics utilize two reduced diameter impellers rated to handle liquids with suspended sand content reaching 100 g/m³. The assembly weighs 119.4 kg and operates in liquids with temperatures up to 25°C.
Performance is driven by an 18.5 kW motor operating on a 415v supply with a rated current of 38.5 Amps. The unit achieves a maximum total head of 64.8 m and a maximum flow rate of 1966.7 L/Min through its semi-axial hydraulic arrangement. These metrics enable dedicated fluid optimization for municipal water supply systems and high-capacity irrigation networks from deep sources.
Thermal protection includes Class F insulation and an IP68 enclosure rating for deep borehole deployment. The pump supports installation depths reaching 350 meters and features double mechanical seals housed in an oil chamber for shaft containment. Internal technopolymer POM-C wear rings and EPDM 70 bearing bushes provide precise clearances and support the duplex shaft.
FEATURES
- A duplex stainless steel taperlock system secures the semi-axial impellers to the shaft for torque transfer.
- EPDM 70 bearing bushes support the pump shaft assembly and handle the mechanical loads during rotation.
- The integrated non-return valve features a stainless steel spring to prevent liquid backflow and water hammer.
- Internal technopolymer POM-C wear rings maintain hydraulic clearances and reduce internal friction.
- Mechanical connection of the 8-inch motor follows NEMA standards to allow for compatibility with industrial systems.
- Stainless steel cable covers provide mechanical protection for the power leads along the pump casing.
- A stainless steel suction strainer is fitted to exclude large solid particles from entering the hydraulic stages.
SPECIFICATIONS
| Max Flow | 1966 L/Min |
| Max Head | 64.8 m |
| Power | 18.5 kW / 415v |
| Rated Current | 38.5 Amps |
| Suitable For | Agricultural Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | Maximum 25°C |
| Outlet Size | 125 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much maintenance does the Lowara Z895-03/2B-3S need?
Virtually none. The sealed bearings and shaft seals are lubricated for life, giving you years of trouble-free daily pumping.
How deep can the Lowara Z895-03/2B-3S push water from underground?
With a maximum head of 64.8 m, it easily lifts water from deep bore shafts and pushes it across long pipe runs without losing pressure.
Can the Lowara Z895 03 2B 3S handle dirty or gritty bore water?
The pump is designed for the documented sand/particle conditions; do not exceed the manufacturer's stated limits. The impellers are built from heavy-duty materials designed to resist abrasion and sediment wear.
Can I run the Lowara Z895-03-2B-3S off a farm generator or solar inverter?
Yes, as long as your generator matches its 18.5 kW / 415v requirement. It's built for continuous duty on 415V three-phase or standard rural power setups.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us