Roll over image to zoom
SKU: ZN612/9
Lowara ZN612/9 Stainless Steel Deep Well 6" Submersible Bore Pump (Wet End Only) with Radial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
For deep-borehole groundwater transfer requiring additional hydraulic lift, the ZN612/9 provides a nine-stage radial flow pump end for six-inch submersible installations. Its additional hydraulic stage provides greater lift than the eight-stage configuration while maintaining a maximum flow of 275 L/Min.
The pump end uses the ZN6 AISI 316 stainless steel construction, with AISI 316L stainless steel impellers and diffusers incorporating removable wear rings. A Duplex stainless steel UNS S 31803 shaft forms the rotating assembly, while the replaceable coupling is Duplex stainless steel UNS S 32304. With the standard L6W motor, the operating water temperature is limited to 35°C and suspended sand up to 100 g/m³ is permitted.
Maximum head is 102 metres and hydraulic performance is specified to EN ISO 9906 Grade 3B. The pump end uses the standard Rp 2 1/2– (65 mm) threaded delivery connection and a standard 6-inch NEMA motor connection for coupling with an L6W submersible motor. Maximum immersion depth reaches 350 metres with L6W motors.
Installation is supported by the microcast discharge head and lower support, with the integrated stainless steel non-return valve incorporated into the discharge arrangement. Holes in the discharge head provide for safety-hook attachment when the pump end is lowered into the borehole.
FEATURES
- The nine-stage radial arrangement adds hydraulic lift for deeper borehole transfer duties.
- Removable wear rings provide a maintainable hydraulic clearance arrangement.
- AISI 316L stainless steel impellers and diffusers provide the specified corrosion-resistant hydraulic construction.
- The Duplex UNS S 31803 shaft provides the specified material for the rotating components.
- The replaceable Duplex UNS S 32304 coupling supports the specified motor coupling arrangement.
- AISI 316L tie rods, cable guard and strainer form part of the external pump-end construction.
- The integrated stainless steel non-return valve is incorporated into the discharge head for backflow control.
* Submersible motor sold separately - requires coupling and assembly
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Can I install the Lowara ZN612 9 horizontally inside a water tank?
Horizontal installation may be permitted where the manufacturer's installation requirements are met, including the required inclination and adequate motor cooling.
How many sprinklers can the Lowara ZN612-9 run at the same time?
With a peak flow of 275 L/Min, it delivers plenty of volume to run large farm irrigators or multiple garden sprinkler lines simultaneously.
What happens if my bore water level drops below the Lowara ZN612_9?
This is a wet-end assembly and does not include a motor. Pair it with a compatible motor and use the motor/controller manufacturer's recommended overload and dry-run protection.
How much maintenance does the Lowara ZN612/9 need?
Virtually none. The sealed bearings and shaft seals are lubricated for life, giving you years of trouble-free daily pumping.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us