Roll over image to zoom
SKU: ZN616/10
Lowara ZN616/10 Stainless Steel Deep Well 6" Submersible Bore Pump (Wet End Only) with Radial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Where pressure boosting requires higher borehole lift, the ZN616/10 provides ten radial stages within a six-inch pump-end configuration. Its maximum head is 123 metres, while the hydraulic capacity remains 367 L/Min.
The pump end uses AISI 316 stainless steel, with AISI 316L impellers and diffusers fitted with removable wear rings. The shaft is Duplex stainless steel UNS S 31803 and the replaceable coupling is Duplex stainless steel UNS S 32304. The wet end is specified for suspended sand up to 100 g/m³.
With an L6W motor, operating water temperature is limited to 35°C. Performance is specified to EN ISO 9906 Grade 3B, with water delivered through the Rp 2 1/2– (65 mm) threaded outlet. The standard 6-inch NEMA motor connection accommodates the L6W motor, with maximum immersion of 350 metres.
A microcast ASTM CF-8M (AISI 316 cast) discharge head and lower support form the discharge assembly. The integrated stainless steel non-return valve provides backflow control, while safety-hook holes assist with borehole installation.
FEATURES
- Ten radial stages provide the lift required for pressure boosting.
- Removable wear rings allow hydraulic clearances to be serviced.
- AISI 316L impellers and diffusers provide the specified hydraulic construction.
- The Duplex UNS S 31803 shaft provides the rotating assembly material.
- The replaceable Duplex UNS S 32304 coupling forms part of the motor connection.
- AISI 316L tie rods and cable guard support the external construction.
- The microcast discharge head incorporates the integrated stainless steel non-return valve.
* Submersible motor sold separately - requires coupling and assembly
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Can I run the Lowara ZN616-10 off a farm generator or solar inverter?
Yes, as long as your generator matches its Continuous-Duty Electric Motor requirement. It's built for continuous duty on 415V three-phase or standard rural power setups.
Is the Lowara ZN616_10 safe to use in mineral-heavy or salty groundwater?
The pump uses stainless-steel wetted components; suitability for saline or aggressive water should be confirmed against the manufacturer's liquid-compatibility limits.
What pipe size connects to the Lowara ZN616/10 discharge port?
It fits a standard 65 mm outlet connection. Using the right pipe diameter ensures you get the full 367 L/Min discharge flow.
Can I install the Lowara ZN616 10 horizontally inside a water tank?
Horizontal installation may be permitted where the manufacturer's installation requirements are met, including the required inclination and adequate motor cooling.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us