Roll over image to zoom
SKU: ZN875-01-3S
Lowara ZN875-01-3S Stainless Steel 5.5 kW Deep Well 8" Submersible Bore Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Corrosive water extraction from deep wells is the primary application for the Lowara ZN875-01-3S, which features full AISI 316 stainless steel construction. Municipal water supply and pressure boosting in high-rise buildings are also served. Agricultural irrigation benefits from the corrosion-resistant materials.
A 5.5 kW motor drawing 12.7 Amps at 415V three-phase delivers 26.5 m of head and a maximum flow of 1833.3 L/Min. The 125 mm discharge outlet includes an integrated non-return valve. Performance is presented according to ISO 9906:2012 Grade 3B tolerances.
Both the pump and motor are constructed from AISI 316 stainless steel, with a semi-axial flow impeller trimmed to 143 mm. The assembly weighs 68.9 kg and handles sand up to 100 g/m³ at 25°C. Full stainless steel construction provides corrosion-resistant performance for aggressive and saline water conditions.
Class F insulation and IP68 enclosure permit immersion to 350 m depth. The L6WN55 motor incorporates water-lubricated thrust bearings. NEMA flange mounting and dual cable covers maintain the 198 mm diameter for standard well compatibility.
FEATURES
- Full AISI 316 stainless steel construction provides corrosion-resistant performance for aggressive and saline water
- Stainless steel impeller construction provides durable hydraulic performance for continuous duty
- POM-C wear rings and EPDM guide bearings provide wear-resistant hydraulic components
- NEMA-compliant mounting dimensions enable straightforward motor integration
- Suction strainer helps prevent debris ingress into the hydraulic assembly
- Double cable guards help protect power cables from mechanical damage
- Water-lubricated thrust bearings support axial load management during continuous operation
* Motor and pump supplied separately - requires assembly
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What power rating drives the motor of this 5.5 kW / 415v submersible borehole pump?
With its 5.5 kW / 415v three-phase motor, the ZN875-01-3S requires a reliable 415V electrical grid or generator setup.
What total vertical head pressure is provided by this 26.5 m deep borehole pump?
With its 26.5 m dynamic head rating, the ZN875-01-3S delivers strong pressure performance for deep borehole deployment.
Is the 125 mm connection dimensioned for high-capacity transfer rates up to 1833.3 L/Min?
Capable of moving up to 1833.3 L/Min, the ZN875 01 3S utilizes a 125 mm discharge port to support large-scale water extraction.
Is this pump wet end constructed from stainless steel alloys to withstand harsh well chemistry?
The corrosion-resistant ZN875_01_3S features full AISI 316 stainless steel construction across the wet end and motor to ensure long-term operational reliability in harsh aquifers.
Is a built-in non-return valve incorporated into the discharge head of this 8-inch pump?
With a built-in check valve and dual cable guards, the ZN875-01-3S ensures safe shutoff protection and easy lowering into 8-inch boreholes.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us