Roll over image to zoom
SKU: ZN875-03/2A-3S
Lowara ZN875-03/2A-3S Stainless Steel 15 kW Deep Well 8" Submersible Bore Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Municipal water supply and high-rise pressure boosting rely on the Lowara ZN875-03/2A-3S, which features full AISI 316 stainless steel construction. Agricultural irrigation and industrial water distribution also benefit from its corrosion-resistant materials. The pump supports vertical and horizontal mounting.
A 15 kW motor drawing 32.1 Amps at 415V three-phase develops 66.7 m of head and a maximum flow of 1700 L/Min. The 125 mm discharge port includes an integrated non-return valve. Hydraulic performance is presented according to ISO 9906:2012 Grade 3B standards.
Both the pump and motor are constructed from AISI 316 stainless steel, containing a semi-axial flow impeller trimmed to 143 mm / 134 mm. The assembly weighs 103.4 kg and processes sand up to 100 g/m³ at 25°C. Full stainless steel construction provides corrosion-resistant performance in aggressive water environments.
Class F insulation and IP68 protection enable immersion to 350 m depth. The L6WN150 motor incorporates water-lubricated thrust bearings. NEMA flange mounting and dual cable covers maintain the 198 mm diameter for 8-inch well compatibility.
FEATURES
- Full AISI 316 stainless steel construction provides corrosion-resistant performance for aggressive and saline water
- Stainless steel impeller construction provides durable hydraulic performance under high-load conditions
- POM-C wear rings and EPDM guide bearings provide wear-resistant hydraulic components
- NEMA-standard mounting interfaces simplify motor alignment and installation
- Suction strainer helps protect hydraulic stages from particulate damage
- Dual cable covers maintain 198 mm diameter for standard borehole compatibility
- Water-lubricated thrust bearings support axial load management during extended operation
* Motor and pump supplied separately - requires assembly
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Is this 15 kW / 415v motor suitable for continuous duty on three-phase industrial power?
Continuous duty performance for the ZN875-03/2A-3S is achieved using a 415V three-phase supply for its 15 kW / 415v motor.
Is this 66.7 m max head rating suitable for extracting water from deep aquifers?
High dynamic lift performance defines the ZN875-03-2A-3S, which delivers water across total head heights reaching 66.7 m.
What volumetric output rate is supported by the 125 mm discharge port design?
Volumetric performance of the ZN875 03 2A 3S is rated at 1700 L/Min through a precision-machined 125 mm discharge flange.
How does the stainless casing material resist chemical corrosion in mineralized wells?
Chemical resistance in mineralized wells is a primary benefit of the ZN875_03_2A_3S, built with full AISI 316 stainless steel construction across the wet end and motor.
What function is served by the integrated spring-loaded check valve in the outlet port?
Water hammer prevention in the ZN875-03/2A-3S is provided by an integrated spring check valve positioned in the upper discharge head.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us