Roll over image to zoom
SKU: ZN875-05-3R
Lowara ZN875-05-3R Stainless Steel 30 kW Deep Well 8" Submersible Bore Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Municipal water supply and pressure boosting in high-rise buildings rely on the Lowara ZN875-05-3R, which features an AISI 316 stainless steel pump with a Duplex stainless steel motor. Agricultural irrigation and industrial water distribution also benefit from its corrosion-resistant materials. The Duplex motor provides corrosion-resistant construction for aggressive environments.
A 30 kW motor drawing 63.8 Amps at 415V three-phase develops 132.3 m of head and a maximum flow of 1833.3 L/Min. The 125 mm discharge port includes an integrated non-return valve. Hydraulic performance is presented according to ISO 9906:2012 Grade 3B standards.
The AISI 316 stainless steel pump casing contains a semi-axial flow impeller trimmed to 143 mm. The assembly weighs 152.9 kg and processes sand up to 100 g/m³ at 25°C. The Duplex stainless steel motor offers corrosion-resistant construction for challenging water conditions.
Class F insulation and IP68 protection allow immersion to 350 m depth. The L6WR300 motor incorporates water-lubricated thrust bearings. NEMA flange mounting and dual cable covers maintain the 198 mm diameter for 8-inch well compatibility.
FEATURES
- Duplex stainless steel motor construction provides corrosion-resistant performance for the most aggressive water
- AISI 316 stainless steel pump casing provides corrosion-resistant construction for saline and chemically aggressive environments
- Stainless steel impeller construction provides durable hydraulic performance for high-pressure operation
- POM-C wear rings and EPDM guide bearings provide wear-resistant hydraulic components
- NEMA-standard mounting interfaces simplify motor alignment and installation
- Dual cable covers maintain 198 mm diameter for standard borehole compatibility
- Water-lubricated thrust bearings support axial load management during extended operation
* Motor and pump supplied separately - requires assembly
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What structural materials protect the pump stack during continuous use?
The ZN875-05-3R is built using cast AISI 316 stainless steel pump casing with a duplex stainless steel motor, ensuring long-term structural integrity in demanding borehole environments.
Does this pump motor require commercial three-phase electricity?
The ZN875-05-3R is driven by a 30 kW / 415v motor requiring 415V three-phase electrical power for high-demand pumping.
How does the non-return valve limit liquid backflow in drop pipes?
Yes. The ZN875 05 3R includes an integrated non-return check valve with a stainless steel spring in the discharge port to limit backflow during shutdown.
Can this pump manage significant elevation lift in agricultural systems?
Capable of reaching a maximum total head of 132 m, the ZN875_05_3R delivers strong vertical pressure for deep well water extraction.
Is this unit capable of high-flow water distribution across networks?
Outputting up to 1833.3 L/Min through its 125 mm outlet port, the ZN875-05-3R provides rapid fluid distribution for water networks.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us