Roll over image to zoom
SKU: F40/125C
Pedrollo F40/125C Cast Iron Centrifugal Pump for Cooling Systems with Brass Impeller
Australia-Wide
(08) 9240 2992
Official Pedrollo
Peace of Mind
Product Overview
Engineered explicitly for commercial cooling systems and temperature control networks, the Pedrollo F40/125C moves non-aggressive liquids with high reliability. To preserve structural integrity and motor health, the equipment requires mounting inside well-ventilated, weather-shielded facility rooms.
Drawing from a 415 V industrial electrical supply, the 1.1 kW mechanism generates stable pressurization, specifically a Max Head 16 m and a Max Flow 550 L/Min. Integration into existing pipework requires a standard 65 mm suction entry bolted to a 40 mm pressurized exit port.
The horizontal flanged layout rigorously follows EN733 dimension standards, promoting balanced kinetic transfer during continuous operation. It draws clear liquid safely, maintaining a 7 m manometric suction limit without inducing destructive cavitation or severe fluid disruption.
A thick cast iron housing surrounds the precision brass impeller, translating motor torque into smooth volumetric movement. The rotational shaft is isolated by a trusted Ceramic, Graphite, and NBR seal configuration. The three-phase drive ensures IE3 compliance, complete with IP55 dust protection and class F temperature resistance.
FEATURES
- Standardized FN-20 Ø 20 mm dynamic mechanical seal interface
- Kinetic power transferred reliably via an AISI 431 stainless steel shaft
- Electrical setup operating securely at a rated current of 3.0 A
- Primary cast casing tested to withstand a 10 bar (PN10) threshold
- Three-phase motor optimized for S1 continuous running applications
- Approved installation environment temperature strictly of -10 °C to +40 °C
- Liquid thermal tolerance mapped directly from -10 °C to +90 °C
SPECIFICATIONS
| Max Flow | 550 L/Min |
| Max Head | 16 m |
| Power | 1.1 kW / 415v |
| Rated Current | 3 Amps |
| Suitable For | Industrial and Agricultural Clean Water Distribution |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to +90°C |
| Inlet Size | 65 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What pressure rating applies to the pump casing?
The pump body on the F40/125C is rated for a maximum pressure of 10 bar (PN10).
What is the P2 power rating of the F40/125C?
The P2 motor output of the F40 125C is 1.1 kW.
Can this pump circulate water in air-conditioning systems?
Yes. Air-conditioning water circulation is a suitable application for the F40_125C when clean, compatible water is used.
What liquid conditions could damage the pump?
Avoid abrasive particles and liquids that could damage pump components when using the F40-125C.
What is the maximum ambient temperature listed for installation?
The ambient temperature range for the F40125C is -10°C to +40°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us