Roll over image to zoom
SKU: F40/160C
Pedrollo F40/160C Cast Iron Centrifugal Pump for Fluid Transfer with Brass Impeller
Australia-Wide
(08) 9240 2992
Official Pedrollo
Peace of Mind
Product Overview
Built to stabilize high-volume fluid transfer operations, the Pedrollo F40/160C mechanical assembly directs large quantities of clear liquids devoid of aggressive particles. To guarantee optimal operational lifespan, the unit must be located within environmentally controlled building zones.
Demanding a 415 V power feed, the 2.2 kW engine delivers high-capacity metrics, specifically a Max Head 27 m and a Max Flow 600 L/Min. Standardized flanged routing uses a 65 mm suction connection paired with a 40 mm delivery line to push liquid upward efficiently.
The physical configuration strictly follows EN733 standardized spacing. It draws effectively, maintaining a 7 m manometric suction lift while balancing heavy fluid dynamics internally to prevent unwanted hydraulic sheer and operational vibration over long operational hours.
Material engineering pairs a thick cast iron volute with a smooth brass impeller to ensure consistent volumetric displacement. A Ceramic, Graphite, and NBR assembly provides primary leak prevention. The motor operates at IE3 efficiency grades, flanked by class F thermal protection and an IP55 shell.
FEATURES
- Standardized FN-20 Ø 20 mm dynamic mechanical isolation interface
- Corrosion-resisting AISI 431 stainless steel shaft construction
- Rated current draw of 5.7 A under standard operating conditions
- Main body engineered strictly for 10 bar (PN10) maximum pressure
- Designed for S1 continuous running without thermal degradation
- Wide liquid temperature tolerance spanning safely from -10 °C up to +90 °C
- Requires protected indoor mounting for maximized equipment lifespan
SPECIFICATIONS
| Max Flow | 600 L/Min |
| Max Head | 27 m |
| Power | 2.2 kW / 415v |
| Rated Current | 5.7 Amps |
| Suitable For | Agricultural and Industrial Irrigation |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to +90°C |
| Inlet Size | 65 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What P2 motor output is listed for the model?
The P2 motor output of the F40/160C is 2.2 kW.
Where should the pump be installed for protection and ventilation?
Install the F40 160C in a well-ventilated indoor location or in a protected area.
What is the permitted maximum pressure in the pump body?
The pump body on the F40_160C is rated for a maximum pressure of 10 bar (PN10).
Are irrigation and domestic water supply listed uses?
The F40-160C is designed for clean water free from abrasive particles and liquids that could damage its components.
Is this pump suitable for continuous use with any liquid?
No. The F40160C is designed for clean water free from abrasive particles; unsuitable liquids can damage its components.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us