Roll over image to zoom
SKU: F65/125B
Pedrollo F65/125B Cast Iron End Suction Centrifugal Pump for HVAC Fluid Circulation with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Pedrollo
Peace of Mind
Product Overview
Targeted at large-scale HVAC fluid circulation networks, the Pedrollo F65/125B provides unmatched stability for continuous clear liquid distribution. Proper installation mandates securely mounting the machinery indoors or inside a sheltered technical enclosure to avoid exposure to detrimental outdoor elements.
Powered by a dedicated 415 V three-phase grid, the 5.5 kW motor delivers highly consistent metrics, generating a Max Head 18 m and a massive Max Flow 2000 L/Min. Seamless pipeline integration involves attaching the infrastructure directly to an 80 mm intake flange and a 65 mm delivery flange.
Constructed as a close-coupled single stage end suction unit adhering directly to EN733 standardized spacing, the internal geometry handles rigorous flow demands safely. This physical footprint secures a reliable 7 m manometric suction lift while mitigating internal turbulence during extended, non-stop routing tasks.
A thick cast iron primary housing encloses a smoothly machined closed impeller, optimizing rotational energy transfer into steady kinetic movement. Dynamic containment depends on a trusted Ceramic, Graphite, and NBR mechanical seal. The high-efficiency IE3 drive mechanism incorporates an IP55 shell and class F thermal rating.
FEATURES
- Dynamic mechanical isolation interface component for maximum security
- Corrosion-resisting stainless steel power transmission shaft
- Electrical system verified for a 12.0 A nominal current draw
- Main body engineered strictly for 10 bar (PN10) maximum pressure
- Approved for non-stop S1 industrial fluid routing applications
- Permitted ambient operating climate ranges from -10 °C up to +40 °C
- Supported liquid thermal capacities bridge -10 °C directly to +90 °C
SPECIFICATIONS
| Max Flow | 2000 L/Min |
| Max Head | 18 m |
| Power | 5.5 kW / 415v |
| Rated Current | 12 Amps |
| Suitable For | Industrial Supply |
| Body Material | Cast iron |
| Liquid Temperature | '-10°C to +90°C |
| Inlet Size | 80 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Are irrigation and domestic water supply listed uses?
The F65/125B is designed for clean water free from abrasive particles and liquids that could damage its components.
Is this pump suitable for continuous use with any liquid?
No. The F65 125B is designed for clean water free from abrasive particles; unsuitable liquids can damage its components.
What P2 motor output is listed for the model?
The P2 motor output of the F65_125B is 5.5 kW.
Where should the pump be installed for protection and ventilation?
Install the F65-125B in a well-ventilated indoor location or in a protected area.
What is the permitted maximum pressure in the pump body?
The pump body on the F65125B is rated for a maximum pressure of 10 bar (PN10).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us