Roll over image to zoom
SKU: F80/200A
Pedrollo F80/200A Cast Iron Electric Centrifugal Pump for Fluid Pressure Boosting with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Pedrollo
Peace of Mind
Product Overview
Focused exclusively on heavy fluid pressure boosting, the Pedrollo F80/200A accurately processes large quantities of clear, non-abrasive liquids across complex commercial networks. Proper facility deployment dictates that the equipment be housed securely indoors away from direct environmental degradation.
Utilizing a 415 V three-phase connection, the 37 kW electric motor pushes liquid powerfully to secure a verified Max Head 62 m and a corresponding volumetric output of Max Flow 3900 L/Min. Plumbing requirements mandate securely mating the single stage end suction system to a 100 mm intake line and an 80 mm delivery line.
Manufactured using an EN733 compliant close-coupled blueprint, the internal volute balances rigorous flow dynamics seamlessly. This exact geometric proportion allows for a maximum manometric suction lift of 7 m, optimizing pressure generation without risking internal hydraulic shear or unwanted vibration.
Mechanical strength relies on a dense cast iron external body safeguarding a solid closed impeller. A professional-grade Ceramic, Graphite, and NBR dynamic interface effectively seals the rotational gap. Energy is provided by an IE3 certified electric motor, carrying IP55 environmental shielding and F-class thermal insulation.
FEATURES
- Industrial FN-40 NU Ø 40 mm mechanical isolation component for shaft safety
- Main rotational transmission crafted from durable stainless steel
- System operates reliably at a nominal electrical current of 65.0 A
- Housing engineered to securely tolerate 10 bar (PN10) maximum internal pressure
- Certified by the manufacturer for non-stop S1 continuous commercial usage
- Safe ambient installation climate strictly confined to -10 °C to +40 °C
- Wide thermal handling capacity for clear liquids spanning -10 °C up to +90 °C
SPECIFICATIONS
| Max Flow | 3900 L/Min |
| Max Head | 62 m |
| Power | 37 kW / 415v |
| Rated Current | 65 Amps |
| Suitable For | Industrial Supply |
| Body Material | Cast iron |
| Liquid Temperature | '-10°C to +90°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What P2 motor output is listed for the model?
The P2 motor output of the F80/200A is 37 kW.
Where should the pump be installed for protection and ventilation?
Install the F80 200A in a well-ventilated indoor location or in a protected area.
What is the permitted maximum pressure in the pump body?
The pump body on the F80_200A is rated for a maximum pressure of 10 bar (PN10).
Are irrigation and domestic water supply listed uses?
The F80-200A is designed for clean water free from abrasive particles and liquids that could damage its components.
Is this pump suitable for continuous use with any liquid?
No. The F80200A is designed for clean water free from abrasive particles; unsuitable liquids can damage its components.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us