Roll over image to zoom
SKU: F80/250B
Pedrollo F80/250B Cast Iron Centrifugal Pump for Heavy Process Supply with Closed Impeller
Australia-Wide
(08) 9240 2992
Official Pedrollo
Peace of Mind
Product Overview
Targeting high-volume commercial process supply requirements, the Pedrollo F80/250B directs large-scale quantities of clear liquid devoid of chemically aggressive particles. For maximized operational lifespan, the heavy-duty assembly must be installed strictly within environmentally controlled plant enclosures to prevent degradation.
Demanding a dedicated 415 V three-phase power feed, the massive 45 kW engine pushes reliable high-capacity metrics, successfully generating a Max Head 77 m and an extreme Max Flow 3600 L/Min. Standardized flanged routing uses a 100 mm suction connection matched directly with an 80 mm delivery line to transfer fluid efficiently.
The structural layout rigorously observes EN733 dimensional spacing for industrial single stage end suction systems. It pulls liquids securely, maintaining a 7 m manometric suction lift while actively balancing aggressive internal dynamics to combat unwanted hydraulic sheer and physical vibration during operation.
Material engineering emphasizes ultimate durability by pairing a thick cast iron volute with a matching internal closed impeller for consistent displacement. A specialized Ceramic, Graphite, and NBR assembly provides necessary leak prevention. The drive operates at IE3 efficiency grades, flanked by class F protection and an IP55 shell.
FEATURES
- Upgraded FN-40 NU Ø 40 mm professional-grade mechanical seal interface
- Heavy-duty main shaft forged from resilient AISI 431 stainless steel
- Rated current draw of 79.0 A under continuous commercial load conditions
- Volute body rigorously tested to 10 bar (PN10) maximum operational limits
- Motor explicitly rated for S1 continuous duty cycles in demanding facilities
- Approved installation environment temperatures ranging from -10 °C to +40 °C
- Engineered exclusively for clear liquid handling spanning -10 °C to +90 °C
SPECIFICATIONS
| Max Flow | 3600 L/Min |
| Max Head | 77 m |
| Power | 45 kW / 415v |
| Rated Current | 79 Amps |
| Suitable For | Industrial Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | '-10°C to +90°C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What power rating should I use when checking this SKU?
The P2 motor output of the F80/250B is 45 kW.
Can the pump be used for air-conditioning water circulation?
Suitable uses for the F80 250B include water supply, pressurisation, irrigation, air-conditioning water circulation, power washing, firefighting, and industrial or agricultural applications.
How high can the manometric suction head be?
The maximum manometric suction head for the F80_250B is 7 m.
What should I know about the maximum casing pressure?
The pump body on the F80-250B is rated for a maximum pressure of 10 bar (PN10).
What liquid and ambient temperatures does the datasheet allow?
For the F80250B, the permitted liquid temperature range is -10°C to +90°C, and the ambient temperature range is -10°C to +40°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us