Roll over image to zoom
SKU: BW-5
SEEPEX BW-5 Cast Iron Close Coupled Transfer Pump
Australia-Wide
(08) 9240 2992
Official SEEPEX
Peace of Mind
Product Overview
Utility transfer skids and small wastewater package stations require an uncomplicated positive displacement machine without heavy lantern frames or twin universal joints. This single-joint wobble stator layout flanges directly onto an electric drive motor, creating a compact close-coupled pump for thin and medium-viscosity liquids.
Thick stator rubber walls minimize internal slip and eliminate one articulated joint cleanly, yielding flat predictable output up to 109.0 L/Min at 1100 rpm. Differential pressure capability extends up to 4 bar range rating or 45 psi plotted curve load with minimal breakaway resistance.
Torque demand at startup measures just 9.5 Nm while absorbed shaft power spans 0.34 to 1.15 kW up to 1100 rpm, matched to 2.2 kW four-pole motors or VFD drives up to 1100 rpm. Plumbing attaches to 1-1/4 inch NPT suction and 1-1/2 inch NPT discharge ports with a silicon carbide DIN 24960 seal.
Eliminating the intermediate bearing lantern shortens assembly length to 1152 mm by 248 mm wide by 254 mm high on an integral baseplate weighing 76 kg complete. A grease-filled joint sleeve protected by retaining bands shields internal drive pins from abrasive grit during routine washdown.
FEATURES
- Sustains range pressures up to 4 bar or 60 psi and 45 psi plotted curve operation
- Delivers steady flow rates up to 109.0 L/Min at 1100 rpm curve peak
- Single-joint wobble stator kinematics eliminate bearing lantern to reduce footprint and parts count
- Thick molded elastomer stator section minimizes fluid slip across light viscosity liquids
- Complete close-coupled reference assembly weighs 76 kg within 1152 x 248 x 254 mm dimensions
- Low 9.5 Nm breakaway starting torque allows compact 0.34 to 1.15 kW shaft power absorption
- Compatible with direct 4-pole, 6-pole, and variable frequency drives up to 1100 rpm
- Standard 1-1/4 inch NPT suction and 1-1/2 inch NPT discharge ports simplify site plumbing
- DIN 24960 single internal silicon carbide mechanical seal alongside grease-filled joint sleeve
- Supported by official SEEPEX manufacturer warranty per order confirmation terms, excluding wearing wobble stator, rotor, joint sleeve, and seal components
SPECIFICATIONS
| Max Flow | 109 L/Min |
| Power | 2.2 kW |
| Suitable For | Compact Viscous Fluid Feeding |
| Body Material | Cast Iron |
| Inlet Size | 32 mm |
| Outlet Size | 40 mm |
| Warranty | 12 Months |
Documents
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Under what differential pressure ceiling and wobble stator geometry does this unit run?
Range line pressure on the SEEPEX BW-5 Cast Iron Close Coupled Transfer Pump holds 4 bar or 60 psi range pressure with 45 psi plotted curve coverage.
What construction alloys, inlet and outlet ports, and seals equip this pump?
Built without a bearing lantern, BW-5 uses a DIN 24960 silicon carbide seal, 1-1/4 and 1-1/2 inch NPT ports, and weighs 76 kg.
What manufacturer warranty provisions and installation rules apply to this pump?
Backed by SEEPEX manufacturer warranty per order confirmation terms, BW5 excludes wobble stators, rotors, sleeves, and seals.
How much volumetric throughput can this industrial pump move at operating speed?
Supplying compact utility transfer, BW 5 delivers up to 109.0 L/Min at 1100 rpm across predictable positive displacement curves.
Which electric drive parameters and speed mechanics power this pumping unit?
Direct-flanged to 4-pole motors or VFDs up to 1100 rpm, SEEPEX Range BW (BW-5) draws 0.34 to 1.15 kW shaft power with 9.5 Nm starting torque.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










