Davey Microlene 1PS10 Polyspun 1 Micron 10" Replacement Water Filter Cartridge

Internal fluid velocity paths for high-precision prefiltration are managed by the Davey Microlene 1PS10 ultra-fine sediment cartridge. This model is designed for drinking water systems, mineral water bottling, and food industry tasks where precision sediment removal at the one micron level is required. It is suitable for installation in compatible standard 10 inch filter housings measuring 254 mm by 64 mm. The unit is frequently employed ahead of Reverse Osmosis systems to capture fine suspended particles.

Manufactured from 100 percent pure food grade polypropylene, the cartridge features thousands of interlocked thermally bonded fibers. This construction includes no chemical binders, fillers, gaskets, or center cores that could leach into the water stream. The fiber matrix is designed to inhibit media migration when the system experiences surges in water pressure or flow. The unit provides a Cryptosporidium cyst removal rating of greater than 99 percent for mechanical particle capture and meets purity guidelines.

Hydraulic performance is specified for a flow rate of 27 L/Min during standard operation. The physical configuration utilizes a 1 micron nominal rating for the capture of sand, silt, algae, and microscopic rust particles. This unit is a passive filtration device that requires no electrical connection or motor configuration. It is rated for liquid temperatures up to 63 degrees Celsius and is intended for compatible cold water filtration applications. It fits standard 64 mm diameter housing brackets.

Polypropylene media provides chemical resistance and is suitable for applications requiring high-purity mechanical filtration. The depth filtration architecture provides high dirt holding capacity, with a recommended replacement interval of every 12 months. The construction results in a clean filter that does not impart taste, odour or colour to the filtered liquid. It is designed for maintenance within existing fluid management systems with no surfactants or chemical fillers used in manufacturing.

• Micron rating is specified at 1 micron nominal for ultra-fine filtration
• Cryptosporidium cyst removal is rated at greater than 99 percent
• Manufactured from 100 percent pure food grade polypropylene material
• Suitable for liquid temperatures reaching 63 degrees Celsius maximum
• Fits compatible standard 10 inch housings with 64 mm diameter
• Utilizes thermally bonded fibers to limit contaminant release downstream
• Provides depth filtration architecture for high dirt holding efficiency