Davey Microlene 5PS10 Polyspun 5 Micron 10" Replacement Water Filter Cartridge

A primary structural material choice for fine sediment removal in the Davey Microlene 5PS10 is a melt-blown polypropylene fiber matrix. This cartridge is designed for applications in drinking water systems, laboratory environments, and the beverage industry. It is suitable for installation in compatible standard 10 inch filter housings measuring 254 mm by 64 mm. The unit serves as a critical prefiltration stage to protect downstream sub-micron filters and Reverse Osmosis membranes from premature fouling caused by suspended solids.

Constructed from 100 percent pure food grade polypropylene, the filter includes no binders, gaskets, fillers, or surfactants. The thermally bonded fiber construction is designed to limit media migration during changes in water pressure or flow. This design limits the release of contaminants and results in a clean output. The cartridge meets food grade standards for structural purity with no center core or loose fibers. It is specified for liquid temperatures up to 63 degrees Celsius.

Fluid flow through the unit is rated at 28 L/Min for sediment capture performance within the water stream. The internal fluid path utilizes a 5 micron nominal rating to trap rust, sand, silt, and algae from the incoming supply. As a passive filtration component, it operates without electrical power, motors, or moving parts. The unit is specified for liquid temperatures up to 63 degrees Celsius and is intended for compatible cold water filtration applications. It is suitable for fine sediment prefiltration tasks.

Polypropylene media provides chemical resistance and is suitable for diverse industrial applications. The depth filtration design allows for high dirt holding capacity, with a recommended replacement interval of 12 months to maintain standards. The filter does not impart taste, odour or colour to the liquid stream while removing suspended solids. It is designed to achieve the capture of particulate matter via a dense depth filtration architecture with no chemical residue.

• Micron rating is specified at 5 microns nominal for fine sediment removal
• Constructed from 100 percent pure food grade polypropylene media
• Suitable for installation in compatible standard 10 inch water filter housings
• Specified for maximum liquid temperatures of 63 degrees Celsius
• Utilizes thermally bonded fibers to limit media release downstream
• Achieves high dirt holding capacity through depth filtration design
• Recommended for replacement every 12 months for hygienic performance