Davey Microlene AS10A 10" Standard Twin Housing Kit with Spanner and Bracket

Standard housing durability is prioritized in the Davey Microlene AS10A twin filter housing, which utilizes reinforced polypropylene for structural integrity. This 10 inch standard kit is for point-of-use or residential filtration applications where tailored cartridge filtration is required. It provides a housing-only platform that allows the selection of specific media. The unit includes a mounting bracket and hardware for securing to a surface.

Constructed from reinforced polypropylene, the housings are designed to withstand hydraulic loads in pressurized water lines. The assembly uses standard 10 inch cartridges with an outer diameter between 63.5mm and 68.5mm, accommodating various filtration media. The unit includes built-in pressure relief valves on the caps to facilitate manual cartridge changes by bleeding off internal pressure. Each kit is rated for operation in water temperatures up to 40 degrees Celsius.

The unit operates with 20mm 3/4 inch BSP female inlet and outlet connections and is rated for a maximum system pressure of 880 kPa. The housing provides a platform for cartridge-based filtration, with pressure drop dependent on the cartridges selected and operating conditions. It is specified for recommended flow rates up to 40 L/min. Its large internal volume accommodates cartridges for whole-of-house filtration applications.

Operational safety is provided by cartridge connections designed to provide a seal to prevent untreated water bypass when correctly installed. The system carries the WaterMark certification and complies with WMTS-103 standards for treatment equipment. The housing design provides the containment required for whole-of-house or point-of-use utility loops. This twin housing offers a platform for homeowners who prioritize custom media selection.

FEATURES

• Manufactured from reinforced polypropylene for durable housing construction
• Features 20mm 3/4 inch BSP female inlet and outlet plumbing connections
• Rated for maximum system operating pressures up to 880 kPa or 128 psi
• Includes built-in pressure relief valves on the housing caps for maintenance
• Supplied with a dedicated housing spanner and mounting bracket assembly
• Accepts standard 10 inch cartridges with diameters up to 68.5mm

Warranty: 1 YEAR Housings