Enviroswim ES3 Freshwater Pool Sanitisation System

The Enviroswim ES3 is an advanced freshwater pool sanitisation system designed to maintain clean and safe swimming pool water with minimal chemical use. Unlike traditional chlorine or saltwater systems, the ES3 uses a combination of electronic oxidation, ultrasonic treatment and mineral ionisation (copper and silver ions) to sanitise pool water while maintaining a freshwater swimming experience.

The system is designed to sanitise swimming pools up to approximately 100,000 litres and works by producing low levels of oxidisers and natural mineral ions that eliminate bacteria, algae and other contaminants in the water. It operates in conjunction with the pool filtration pump and must only run when water is flowing through the wet cell to ensure safe and effective sanitisation.

A key advantage of the ES3 system is its freshwater operating range, which requires a total dissolved solids (TDS) level of about 1,000–1,500 ppm, significantly lower than traditional saltwater chlorination systems. This results in softer water that is gentler on skin, eyes and pool surfaces.

The ES3 includes a wall-mounted electronic control unit, oxidiser/ioniser wet cell assembly, ultrasonic chamber and copper test kit. The system typically runs around 1 hour per 10,000 litres of pool water per day during the swimming season to maintain sanitisation levels.

FEATURES

• Freshwater pool sanitisation system
  
• Suitable for swimming pools up to 100,000 L
  
• Electronic oxidising system for water sanitisation
  
• Ultrasonic chamber to enhance water treatment
  
• Copper and silver ionisation electrodes
  
• Low chemical requirement compared with chlorine systems
  
• Works with existing pool filtration pump
  
• Designed for freshwater pool environments (TDS 1,000–1,500 ppm)
  
• Wall-mounted electronic control unit with timer
  
• Includes wet cell, ultrasonic chamber and copper test kit