MATelec HydroWHIZ FPC-63141-(AA-D) Mild Steel IP56 Inner Door 1PH 1.6-13A DOL Single Pump Controller

Level, pressure and temperature control functions make the MATelec FPC-63141-(AA-D) HydroWHIZ suitable for single-pump system control across commercial and industrial installations. The enclosure layout includes a protective inner door for touch safety, a removable gland plate to simplify cable entry, and a pad-lockable mains power isolator switch.

The panel connects to a 230Vac power supply, distributing switching power to the connected pump motor terminal connections. Motor winding protection is provided by thermal overloads adjustable within the 1.6-13A range, protecting the pump motor against overload. Field switch lines and logic circuits operate at 24Vdc to isolate remote sensors, backed by circuit-breaker protection on the control lines.

Flexible setup options include level empty and fill, pressure boosting, or temperature control. System states are governed by a 4-20mA analogue transducer signal and up to eight digital inputs representing start, standby, and alarm conditions.

Live operating diagnostics are accessible on the colour touchscreen HMI, which plots analogue trends and logs pump start and run hours. Local alarms activate an onboard visual strobe and a mutable audible buzzer, with audible buzzer mute function. Integration options feature a common fault volt-free contact rated for BMS reporting and Modbus RTU RS485 terminals for SCADA networks. Mechanical protection is provided by high and low level protection, feedback signal fault protection, cycle protection, and a 7-day pump anti-seize routine.

Features

• Removable gland plate to facilitate simple site conduit wiring access.
• Integrated real-time clock backed by an onboard coin-cell battery for precise timestamping of system events.
• DIN-rail mounted terminal blocks for neat and organized connection of input sensors and motor cables.
• Termination resistor jumper bridge included on the RS485 communication link for line balancing.
• Pad-lockable mains power isolator switch to physically isolate the incoming mains power supply for safe maintenance.
• Audible siren output terminal on the control board for integration of remote strobe and buzzer indicators.
• Microprocessor-controlled board memory that allows full factory parameter reset via HMI menus.