MATelec HydroWHIZ FPC-63241-(AA-D)/SMS Mild Steel IP56 Inner Door 1PH 1.6-13A DOL Dual Pump Controller

SMS communication extends the MATelec FPC-63241-(AA-D)/SMS, combining 230Vac dual-pump control with the ME-Link module for remote alarm and status messaging. Physical safety elements include a pad-lockable mains power isolator switch, an inner door mounting system for HMI hardware, and a removable gland plate for wiring. Active duty sharing rotates pump starting sequences automatically based on accumulated run hours to equalise pump run hours across the system.

Power distribution is rated for 230Vac supplies, utilizing contactors to switch the pump terminals on demand. For thermal safety, the system is specified for an overload selection range of 1.6-13A per pump to protect the pump motor against overload. Input terminals and logic boards operate on an isolated 24Vdc safety control circuit, protected by individual control circuit breakers.

This system operates under level, pressure, or temperature control modes, selectable via HMI setup screens. Users can connect an analogue 4-20mA feedback sensor together with eight digital inputs for low, stop, start, standby start, and high level alarms. Sequenced staging coordinates starting sequences with a 3-second delay between pumps, and a 1-second staggered delay when stopping the motors.

A colour touchscreen HMI displays live system status, historical alarm counts, date-stamped fault codes, and graphical feedback trends. Diagnostic alerts utilize an integrated strobe and an audible buzzer, featuring audible buzzer mute function. The cell-based ME-Link CAT-M1 module communicates on the 700MHz spectrum, transmitting text messages for high level, fault, and power events. Software protective routines like pump cycle protection, no flow limits, high and low level protection, and a 7-day pump anti-seize routine enable system safety.

Features

• Removable inner door configuration that isolates high-voltage terminal wiring from HMI controls.
• Circuit-breaker protected low-voltage control circuitry operating on a dedicated 24Vdc supply loop.
• Enclosure ground bonding terminal blocks to provide electrical earthing of the panel assembly.
• Two digital inputs on the ME-Link Module for integration of external security or status switches.
• Two onboard programmable relay outputs on the cellular module to enable remote switching of local hardware.
• ME-Link CAT-M1 remote monitoring module utilizing 700MHz cellular frequency to maximize signal strength.
• Vandal-resistant external panel mount antenna designed to allow signal integrity in outdoor locations.