PoolControls SWC35pH Salt Water Chlorinator 35g/hr for Medium Pools with Algorithmic pH Control

The SWC35pH integrated system provides automated chlorine generation alongside automated water balancing. This configuration is built to sanitise and regulate pools up to 100000 liters. It is suitable for residential pools with high bather demands. The unit performs dual duties, keeping water sanitised and managing pH through a single integrated power pack.

An inbuilt peristaltic pump doses diluted acid at a 2:1 ratio to maintain water balance. The self-cleaning cell uses reverse polarity and contains titanium plates coated with ruthenium. The complete wall-mounted controller unit weighs 4.2 kg. The physical layout places the dosing pump alongside the primary electronics for straightforward installation.

The power supply runs on 240 V and has a chlorine output rating of 35 grams per hour. It relies on a proprietary dosing algorithm rather than physical probes, meaning no manual calibration is needed. It operates with water salinity between 3000 and 5000 ppm. Because there are no probes to dry out, the system remains accurate long term.

A digital screen provides readouts of system parameters and dosing settings. This system features three timed power outlets to regulate filtration schedules and pool lights. The housing provides outdoor ingress protection for internal components. Operators can set custom run times for both chemical dosing cycles and chlorine generation.

Features

• Automated pH balancing via an integrated peristaltic dosing pump
• Outputs 35 grams of chlorine per hour for larger pool sanitation
• Algorithm-based dosing avoids the need for physical probes and calibration
• Three timed power outlets coordinate filtration and lighting schedules
• Ruthenium plate coating on titanium cell extends hardware life
• Doses standard diluted acid mixture at a two-to-one ratio

Warranty: 3 Years manufacturer coverage applies.