Puretec PX011-2 Polyspun Sediment Twinpack 1 Micron 2.5" x 10" Water Filter Cartridge

Supplied as a convenient twin-pack, the Puretec PX011-2 polyspun sediment cartridge set offers dual-stage filtration for standard water filtration systems. This model is suitable for standard filter housings, providing consecutive particulate block stages in domestic setups. Its installation is compatible with paired inline filter arrangements.

Constructed from pure virgin polypropylene synthetic fibers, each cartridge in this set features spun and melted media. The polyspun design incorporates a coreless structure with no center core to restrict liquid flow. The twin-pack weighs approximately 0.56 kg and operates in water temperatures from 4.4°C to 60°C.

Each cartridge in this twin-pack measures 2.5 inches in diameter by 10 inches in length, featuring a nominal rating of 1 micron. The system achieves a maximum flow capacity of 27 L/Min under typical supply pressure, capturing micro-fine water impurities.

Depth filtration is performed by the graded density structure of each cartridge, capturing larger particulates on the exterior and finer ones near the center. This coreless multi-layered layout provides a high dirt-holding capacity. The pure polypropylene construction is compatible with standard cold-water supply networks. This model is designed for standard filtration housings without modification.

• Spun polypropylene construction utilizing synthetic fibers melted simultaneously for media longevity.
• Coreless depth filtration configuration utilizes a graded density design to collect solid particles.
• Convenient twin-pack contains two replacement cartridges for double inline filter systems.
• Filters suspended sand, silt, rust, and clay, serving as a primary inline physical pre-filter.
• Nominal filtration rating specified at 1 Micron to capture raw water particulates in cold-water lines.
• Operates at maximum flow capacity of 27 L/Min, providing filtration with minimal flow resistance.
• Withstands water temperatures up to 60°C (140°F), making the cartridge suitable for bore water supplies.