Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
This submersible Channel Impeller Pump is suitable for equalization tanks, wastewater drainage, and sewage treatment systems. It operates in continuous or intermittent duty, handling raw sewage and water containing solid matter in municipal sumps. The unit is intended for complete submersion, maintaining steady drainage operations.
Hydraulic output is driven by a 15 kilowatt three-phase motor operating at 415 volts and 50Hz. The rated current is 30.5 amperes under Star-Delta starting conditions. The pump delivers a maximum head of 13 metres and a maximum flow rate of approx. 10000 L/Min, delivering water transfer across varying pressure levels.
Equipped with a shrouded two-channel impeller, this model manages solids passage with minimal clogging from fibrous materials. The solids passage dimensions are 73 by 64 millimetres for 50Hz configurations. The hydraulic design maintains high flow capacity while facilitating solids handling.
The structural frame consists of a gray cast iron pump casing, gray cast iron suction cover, and a 420 stainless steel shaft. Seal protection is provided by dual inside mechanical seals with silicon carbide faces running in a 5500 millilitres oil chamber. Each winding contains an integrated miniature thermal protector to protect against dry running.
FEATURES
- Watertight cable entry contains an anti-wicking block that shields the motor housing from liquid penetration.
- Original oil lifter device maintains mechanical seal face lubrication and cooling under low oil levels.
- Pre-lubricated double-shielded C3 ball bearings provide mechanical support for continuous shaft operation.
- Pump frame is compatible with the TO guide rail fitting system for simplified service and inspection.
- Auxiliary lip seal functions as a dust barrier to protect primary silicon carbide mechanical seals from wear.
- Continuous-duty dry-type induction motor is protected with IP68 enclosure class and Class F insulation.
- Heavy gray cast iron discharge bore features a JIS 10kg/cm2 flange connection for secure piping connection.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.