Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Suitable for municipal sewage and industrial wastewater treatment, the pump is engineered for liquids between 0 and 40°C. It is designed for environments requiring complete submersion and continuous-duty service in collection sumps. The configuration manages raw sewage and water carrying solid matters.
A maximum flow rate of 14000 L/Min and a maximum total head of 23.0 m define the hydraulic output of this submersible unit. Operating on a 415v three-phase supply, the 30 kW motor draws a rated current of 59 Amps at 50Hz.
The motor is a 4-pole dry-type induction motor operating at a synchronous speed of 1500 min?¹. Activation is controlled through a Star-Delta starting configuration to manage the electrical load during the initial power application. The pump features a shrouded two-channel impeller which enables an 80 mm solids passage for handling wastewater containing suspended solids.
Structural hardware consists of a Gray Cast Iron JIS FC250 pump casing and a 420 stainless steel shaft. This model is supplied as a free-standing unit with a cast iron stand. A guide rail fitting version is available under model code TO250BZ430, allowing the pump to be connected to or disconnected from the discharge piping by lowering or hoisting the unit.
FEATURES
- Miniature thermal protectors embedded in each winding which signal the control panel to shut off power if excessive heat builds up.
- Watertight cable entry with an anti-wicking block protects the motor housing from water incursion due to capillary action.
- Permanently lubricated deep-groove double-shielded C3 ball bearings supporting the 420 stainless steel shaft for continuous duty.
- Shrouded two-channel impeller with a maximum solids passage of 80 mm.
- Double-face mechanical seals with Silicon Carbide faces isolated in an oil chamber.
- Tsurumi Oil Lifter forcibly supplies lubricating oil to the mechanical seal even if lubricant volume falls below the rated level.
- Integrated pressure relief port designed to protect the mechanical seal by drawing abrasive particles away from the faces.
- Secondary lip seal used as a dust seal to protect the primary sealing system from fine sand and abrasive particles.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.