Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Configured for municipal sewage and industrial wastewater management, this 37 kW model is suitable for continuous-duty operation in liquids with temperatures ranging from 0 to 40°C. The unit remains completely submerged during service, handling raw sewage and effluents.
Performance specifications reach a maximum total head of 27.5 m and a maximum flow rate of 15000 L/Min at 50Hz. The 37 kW motor draws a rated current of 72 Amps.
The 4-pole dry-type induction motor in this unit achieves a synchronous speed of 1500 min?¹ for its operating cycles. Motor activation is managed by a Star-Delta starting method, providing a controlled electrical application on a 415v three-phase supply. This configuration includes a shrouded two-channel impeller with an 80 mm solids passage for handling wastewater containing suspended solids.
Free-standing installation is the standard configuration for this unit, provided with a cast iron base stand for stable placement. A guide rail fitting version is available under model code TO250BZ437, allowing the pump to be connected to or disconnected from the discharge piping by lowering or hoisting the unit.
FEATURES
- Tsurumi Oil Lifter forcibly supplies lubricating oil to the mechanical seal and continues supplying oil even if lubricant falls below the rated volume.
- Pressure relief port protects the mechanical seal against excessive pressure and draws abrasive particles away from the seal faces.
- Shrouded two-channel impeller with a maximum solids passage of 80 mm.
- Double-face Silicon Carbide mechanical seals isolated in an oil chamber providing a clean lubricating environment.
- Miniature thermal protectors embedded in each motor winding which signal the control panel to shut off power if excessive heat builds up.
- Watertight cable entry with an anti-wicking block preventing water incursion due to capillary action through damaged power leads.
- Permanently lubricated deep-groove double-shielded C3 ball bearings support the rotating shaft.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.